Chen Minjun, Kumrić Ksenija R, Thacker Conner, Prodanović Radivoje, Bolognesi Guido, Vladisavljević Goran T
Department of Chemical Engineering, Loughborough University, Loughborough LE11 3TU, UK.
Laboratory of Physics, Vinča Institute of Nuclear Sciences-National Institute of the Republic of Serbia, University of Belgrade, 11001 Belgrade, Serbia.
Gels. 2023 Oct 26;9(11):849. doi: 10.3390/gels9110849.
Monodispersed polyethylene glycol diacrylate (PEGDA)/acrylic acid (AA) microgels with a tuneable negative charge and macroporous internal structure have been produced using a Lego-inspired droplet microfluidic device. The surface charge of microgels was controlled by changing the content of AA in the monomer mixture from zero (for noncharged PEGDA beads) to 4 wt%. The macroporosity of the polymer matrix was introduced by adding 20 wt% of 600-MW polyethylene glycol (PEG) as a porogen material into the monomer mixture. The porogen was successfully leached out with acetone after UV-crosslinking, which resulted in micron-sized cylindrical pores with crater-like morphology, uniformly arranged on the microgel surface. Negatively charged PEGDA/AA beads showed improved adsorption capacity towards positively charged organic dyes (methylene blue and rhodamine B) compared to neutral PEGDA beads and high repulsion of negatively charged dye molecules (methyl orange and congo red). Macroporous microgels showed better adsorption properties than nonporous beads, with a maximum adsorption capacity towards methylene blue of 45 mg/g for macroporous PEGDA/AA microgels at pH 8.6, as compared to 23 mg/g for nonporous PEGDA/AA microgels at the same pH. More than 98% of Cu(II) ions were removed from 50 ppm solution at pH 6.7 using 2.7 mg/mL of macroporous PEGDA/AA microgel. The adsorption of cationic species was significantly improved when pH was increased from 3 to 9 due to a higher degree of ionization of AA monomeric units in the polymer network. The synthesized copolymer beads can be used in drug delivery to achieve improved loading capacity of positively charged therapeutic agents and in tissue engineering, where a negative charge of scaffolds coupled with porous structure can help to achieve improved permeability of high-molecular-weight metabolites and nutrients, and anti-fouling activity against negatively charged species.
利用受乐高启发的微滴微流控装置制备了具有可调负电荷和大孔内部结构的单分散聚乙二醇二丙烯酸酯(PEGDA)/丙烯酸(AA)微凝胶。通过将单体混合物中AA的含量从零(用于不带电的PEGDA珠)改变到4 wt%,可以控制微凝胶的表面电荷。通过向单体混合物中添加20 wt%的600-MW聚乙二醇(PEG)作为致孔剂材料,引入聚合物基质的大孔性。紫外光交联后,用丙酮成功地浸出致孔剂,这导致了微米级的圆柱形孔,其具有火山口状形态,均匀地排列在微凝胶表面。与中性PEGDA珠相比,带负电荷的PEGDA/AA珠对带正电荷的有机染料(亚甲基蓝和罗丹明B)表现出更高的吸附能力,并且对带负电荷的染料分子(甲基橙和刚果红)具有高排斥性。大孔微凝胶比无孔珠表现出更好的吸附性能,在pH 8.6时,大孔PEGDA/AA微凝胶对亚甲基蓝的最大吸附容量为45 mg/g,而在相同pH下无孔PEGDA/AA微凝胶为23 mg/g。使用2.7 mg/mL的大孔PEGDA/AA微凝胶,在pH 6.7时,超过98%的Cu(II)离子从50 ppm溶液中被去除。当pH从3增加到9时,由于聚合物网络中AA单体单元的更高电离度,阳离子物种的吸附显著改善。合成的共聚物珠可用于药物递送,以实现带正电荷治疗剂的更高负载能力,以及用于组织工程,其中支架的负电荷与多孔结构相结合可有助于实现高分子量代谢物和营养物质的更高渗透性,以及对带负电荷物种的抗污活性。