Research on the Moisture Stability of Asphalt Mixtures with Three Solid Waste Fillers.

Widespread interest has been drawn to the use of solid waste fillers as a partial replacement for natural fillers in high-performance asphalt mixtures in recent years. However, variations in the material properties of solid waste fillers remain a problem for the recycling method. To address this issue, the limestone powder in asphalt mixtures was replaced with three solid waste fillers, including steel slag powder, tailings powder and calcium carbide slag powder in this study. The chemical composition of the fillers was first characterized to assess the homogeneity of the material. Then, a dense-graded asphalt mixture (AC) and a stone matrix asphalt (SMA) mixture were designed, produced and characterized for wet stability. The results show that the asphalt mixtures with solid waste fillers were superior to limestone powder (LP) asphalt mixtures in terms of resistance to water damage, and the steel slag powder showed the best improvement in moisture stability of the asphalt mixtures. The optimum substitution of solid waste filler for limestone filler was 25%. With the addition of anti-stripping agents, the moisture stability of the asphalt mixture with limestone filler was also greatly enhanced. On the contrary, a marginal enhancement was observed in the moisture stability of asphalt mixtures using solid waste fillers. Solid waste fillers can be used in asphalt mixtures and have a similar function as that of anti-stripping agents. In summary, the use of solid waste fillers to replace mineral fillers in asphalt mixtures is a reliable, value-added recycling option.