On the thermal impact during drilling operations in guided dental surgery: An experimental and numerical investigation.

In recent years, a major development in dental implantology has been the introduction of patient-specific 3D-printed surgical guides. The utilization of dental guides offers advantages such as enhanced accuracy in locating the implant sites, greater simplicity, and reliability in performing bone drilling operations. However, it is important to note that the presence of such guides may contribute to a rise in cutting temperature, hence increasing the potential hazards of thermal injury to the patient's bone. The aim of this study is to examine the drilling temperature evolution in two distinct methods for 3D-printed surgical dental guides, one utilizing an internal metal bushing system and the other using external metal reducers. Cutting tests are done on synthetic polyurethane bone jaw models using a lab-scale automated Computer Numeric Control (CNC) machine to find out the temperature reached by different drilling techniques and compare them to traditional free cutting configurations. Thermal imaging and thermocouples, as well as the development of numerical simulations using finite element modeling, are used for the aim. The temperature of the tools' shanks experienced an average rise of 2.4 °C and 4.8 °C, but the tooltips exhibited an average increase of around 17 °C and 24 °C during traditional and guided dental surgery, respectively. This finding provides confirmation that both guided technologies have the capability to maintain temperatures below the critical limit for potential harm to bone and tissue. Numerical models were employed to validate and corroborate the findings, which exhibited identical outcomes when applied to genuine bone samples with distinct thermal characteristics.