Marwat Mohsin Ali, Ishfaq Shaheer, Adam Kanwar Muhammad, Tahir Bilal, Shaikh Muhammad Hamza, Khan Muhammad Fawad, Abdul Karim Muhammad Ramzan, Din Zia Ud, Abdullah Syed, Ghazanfar Esha
Faculty of Materials and Chemical Engineering, Ghulam Ishaq Khan (GIK) Institute of Engineering Sciences and Technology Topi 23640 Pakistan
RSC Adv. 2024 Jan 9;14(3):2102-2115. doi: 10.1039/d3ra07788h. eCollection 2024 Jan 3.
Metal-organic frameworks (MOFs) are one of the most sought-after materials in the domain of supercapacitors and can be tailored to accommodate diverse compositions, making them amenable to facile functionalization. However, their intrinsic specific capacitance as well as energy density is minimal, which hinders their usage for advanced energy storage applications. Therefore, herein, we have prepared six electrodes, , Ni-Co-Mn MOFs, polyaniline (PANI), and reduced graphene oxide (rGO) along with their novel nanocomposites, , C, C, and C, comprising MOFs : PANI : rGO in a mass ratio of 100 : 1 : 0.5, 100 : 1 : 1, and 100 : 1 : 10, respectively. The polyaniline conducting polymer and rGO enabled efficient electron transport, enhanced charge storage processes, substantial surface area facilitating higher loading of active materials, promoting electrochemical reactions, and ultimately enhanced nanocomposite system performance. As a result, scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques confirmed the successful synthesis and revealed distinct morphological features of the materials. Following electrochemical testing, it was observed that composition C exhibited the highest performance, demonstrating a groundbreaking specific capacitance of 1007 F g at 1 A g. The device showed a good energy density of 25.11 W h kg and a power density of 860 W kg. Remarkably, the device demonstrated a capacity retention of 115% after 1500 cycles, which is a clear indication of the wettability factor, according to the literature. The power law indicated -values in a range of 0.58-0.64, verifying the hybrid-type behavior of supercapacitors.
金属有机框架材料(MOFs)是超级电容器领域中最受追捧的材料之一,并且可以进行定制以容纳不同的成分,使其易于进行功能化修饰。然而,它们的固有比电容以及能量密度极小,这阻碍了它们在先进储能应用中的使用。因此,在本文中,我们制备了六种电极,即镍钴锰MOFs、聚苯胺(PANI)、还原氧化石墨烯(rGO)以及它们的新型纳米复合材料,即C、C和C,其中MOFs、PANI和rGO的质量比分别为100∶1∶0.5、100∶1∶1和100∶1∶10。聚苯胺导电聚合物和rGO实现了高效的电子传输,增强了电荷存储过程,具有较大的表面积有利于活性材料的更高负载量,促进了电化学反应,并最终提升了纳米复合体系的性能。结果,扫描电子显微镜(SEM)和X射线衍射(XRD)技术证实了合成成功,并揭示了材料独特的形态特征。经过电化学测试后,观察到成分C表现出最高的性能,在1 A g下展现出创纪录的1007 F g的比电容。该器件显示出25.11 W h kg的良好能量密度和860 W kg的功率密度。值得注意的是,根据文献,该器件在1500次循环后容量保持率为115%,这清楚地表明了润湿性因素。幂律表明指数值在0.58 - 0.64范围内,验证了超级电容器的混合型行为。