Majeed Hammad, Iftikhar Tehreema, Ashir Nadeem Muhammad, Altaf Nazir Muhammad
Department of Chemistry, University of Management and Technology (UMT) Lahore, Sialkot Campus, 51310, Pakistan.
Applied Botany Lab, Department of Botany, Government College University, 54000, Lahore, Pakistan.
Heliyon. 2024 Jan 14;10(2):e24467. doi: 10.1016/j.heliyon.2024.e24467. eCollection 2024 Jan 30.
Mitigating climate change can be achieved by opting for sustainable, plant-based materials instead of relying on hazardous chemicals that come with various side effects. Various natural plant extracts find widespread application in synthesizing insect-repellent coatings, particularly in industries such as paint manufacturing. The increasing demand for these coatings has led us to find out the effects of different plant extracts for the efficient preparation of paints with more advanced impacts and low cost. For this purpose, zinc nanoparticles of L. and its extracts were used in this study due to their remarkable biocidal and antimicrobial activities. The extract was prepared by the process of oven-drying and heating followed by their filtration. Then, they were subjected to different phytochemical tests that were performed in which plant material did not contain flavonoids and glycol. The comparison of the size of nanoparticles was visible during the weighing which was found to be 4.451 mg. Advanced characterization techniques like FTIR, UV visible spectroscopy, and particle size analysis were adopted for the analysis of nanoparticles of plant extract. The FTIR analysis of the plant material was reported to lie in the range of 1000-1800 cm. On the other hand, the results of UV visible spectroscopy of nanoparticles of plant extract showed absorption peaks around 300 nm. The produced material was integrated into paint formulations to impart insect-repellent and antibacterial characteristics. Painted panels exhibited notable antibacterial efficacy, presenting an inhibition zone of 0.7 cm for and 0.3 cm for when utilizing biocide. Plant nanoparticles yielded inhibition zones of 1 and 1.2, while aqueous extract resulted in zones of 0.2 and 0.5, respectively. A thorough evaluation of the paint's color attributes, including ΔL, Δa, Δb, and ΔE, indicated noteworthy differences. The CMC ΔE values from the trials exceeded 1, indicating a substantial change in shade. The batches of paints containing extracts and nanoparticles were found to be lighter in color specifically green and yellow colors. Their antimicrobial and insect repellant activity was tested using the mosquitos of with an age of 4-5 weeks, revealing that formulations with plant extracts exhibited a 61 % effective period, greater than the 7 % observed in non-biocidal formulations. The paint responded best towards these mosquitoes in terms of repellency and the ultimate target of this study was achieved.
减轻气候变化可以通过选择可持续的植物基材料来实现,而不是依赖具有各种副作用的有害化学物质。各种天然植物提取物在合成驱虫涂料中有着广泛的应用,特别是在油漆制造等行业。对这些涂料日益增长的需求促使我们去探究不同植物提取物对高效制备具有更先进效果和低成本的油漆的影响。为此,本研究使用了L.的锌纳米颗粒及其提取物,因为它们具有显著的杀菌和抗菌活性。提取物通过烘干和加热过程制备,然后过滤。接着,对它们进行了不同的植物化学测试,测试发现植物材料不含黄酮类化合物和二醇。在称重过程中可以看到纳米颗粒大小的比较,其重量为4.451毫克。采用傅里叶变换红外光谱(FTIR)、紫外可见光谱和粒度分析等先进表征技术对植物提取物的纳米颗粒进行分析。据报道,植物材料的FTIR分析范围在1000 - 1800厘米。另一方面,植物提取物纳米颗粒的紫外可见光谱结果显示在300纳米左右有吸收峰。将所制备的材料整合到油漆配方中,以赋予其驱虫和抗菌特性。涂漆面板表现出显著的抗菌效果,使用杀菌剂时,对[具体细菌名称1]的抑菌圈为[具体数值1]厘米,对[具体细菌名称2]的抑菌圈为[具体数值2]厘米。植物纳米颗粒产生的抑菌圈分别为1和1.2,而水提取物产生的抑菌圈分别为0.2和0.5。对油漆颜色属性的全面评估,包括ΔL、Δa、Δb和ΔE,显示出显著差异。试验中的临界胶束浓度(CMC)ΔE值超过1,表明色调有显著变化。含有提取物和纳米颗粒的油漆批次被发现颜色更浅,特别是绿色和黄色。使用4 - 5周龄的[具体蚊子品种]蚊子对其抗菌和驱虫活性进行测试,结果表明含有植物提取物的配方显示出61%的有效时长,大于在非杀菌配方中观察到的7%。就驱避性而言,该油漆对这些蚊子反应最佳,本研究的最终目标得以实现。