Research on Magnetic Field-Based Damage Detection Technology for Ferromagnetic Microwires.

Composite materials are frequently exposed to external factors during their operational service, resulting in internal structural damage which subsequently impacts their structural performance. This paper employs ferromagnetic materials for their sensitivity to magnetic field strength. By detecting variations in the magnetic field within the embedded ferromagnetic microwires of composite materials, the aim is to indirectly assess the health status of the composite materials. Firstly, a theoretical numerical model for magnetic field intensity at the crack site was established. Subsequently, a finite element model was employed to analyze the variations in the magnetic characteristics of ferromagnetic microwires at the crack site. Under different parameter conditions, the patterns of magnetic signals at the crack site were determined. The results indicate that with an increase in the angle between the external magnetic field and the crack, the fitted curve of the magnetic signal shows a linear increase. The distance between the peak and valley of the radial magnetic signal in the axial direction decreases, and the axial magnetic signal transitions from double-peak to single-peak. With the increase in crack depth, the fitted curve of the magnetic signal shows a linear increase, and the magnetic signal at the crack tip also exhibits a linear increase. An increase in crack width leads to a non-linear decrease in the fitted curve of the magnetic signal, and after reaching a certain width, the magnetic signal stabilizes. For two identical cracks at different distances, the magnetic signal exhibits a transition from a complete pattern to two complete patterns. With the increase in the external magnetic field, the magnetic signal shows a completely regular linear increase. By analyzing and calculating the variations in magnetic signals, the patterns of magnetic characteristics under the damaged state of ferromagnetic microwires were obtained. This serves as a basis for assessing whether they can continue in service and for evaluating the overall health status of composite materials.