Department of Chemistry, University of Cincinnati, 312 College Dr., 404 Crosley Tower, Cincinnati, OH 45221-0172, USA.
Lab Chip. 2024 Mar 26;24(7):1918-1929. doi: 10.1039/d3lc00793f.
The oxygen gradient across the intestine influences intestinal physiology and the microbial environment of the microbiome. The microbiome releases metabolites that communicate with enterochromaffin cells, neuronal cells, and resident immune cells to facilitate the bidirectional communication across the gut-brain axis. Measuring communication between various cell types within the intestine could provide essential information about key regulators of gut and brain health; however, the microbial environment of the intestine is heavily dependent on the physiological oxygen gradient that exists across the intestinal wall. Likewise, there exist a need for methods which enable real-time monitoring of intestinal signaling yet this remains challenging due to the inability to adequately culture intestinal tissue while also exposing the appropriate locations of the intestine for probe insertion and monitoring. Here, we designed and fabricated a 3D printed microfluidic device to maintain the oxygen gradient across precision cut murine intestinal slices with the capability to couple to external neurochemical recording techniques. The gradient is maintained from outlets below while allowing access to the slice from above for detection with fast scan cyclic voltammetry (FSCV) and carbon-fiber microelectrodes. A series of 11 outlet ports were designed to lay underneath the slice which were connected to channels to deliver oxygenated deoxygenated media. Outlet ports were designed in an oval shape where deoxygenated media was delivered to the center of the slice and oxygenated media is delivered to the outer portion of the slice to mimic the location of oxygen across the intestine. An oxygen sensitive fluorescent dye, tris(2,2'-bipyridyl)dichlororuthenium(II), was used to characterize the tunability of the gradient. Viability of the tissue was confirmed by both fluorescence microscopy and FSCV. Additionally, we measured simultaneous serotonin and melatonin signaling with FSCV in the intestine for the first time. Overall, this chip provides a significant advance in our ability to culture intestinal slices with the added benefit of direct access for measurements and imaging.
肠道内的氧气梯度会影响肠道生理学和微生物组的微生物环境。微生物组释放的代谢物与肠嗜铬细胞、神经元细胞和常驻免疫细胞进行通讯,从而促进肠道-大脑轴的双向通讯。测量肠道内各种细胞类型之间的通讯可以提供关于肠道和大脑健康关键调节剂的重要信息;然而,肠道的微生物环境严重依赖于存在于肠壁上的生理氧气梯度。同样,需要能够实时监测肠道信号的方法,但由于无法充分培养肠道组织,同时为探针插入和监测暴露适当的肠道位置,这仍然具有挑战性。在这里,我们设计并制造了一种 3D 打印微流控设备,以维持精确切割的鼠肠切片的氧气梯度,同时能够与外部神经化学记录技术结合使用。梯度从下方的出口维持,同时允许从上方进入切片,以便使用快速扫描循环伏安法(FSCV)和碳纤维微电极进行检测。设计了一系列 11 个出口端口,位于切片下方,与输送充氧和脱氧介质的通道相连。出口端口设计为椭圆形,脱氧介质被输送到切片的中心,充氧介质被输送到切片的外部,以模拟肠道内的氧气位置。使用氧敏感荧光染料三(2,2'-联吡啶)二氯钌(II)来表征梯度的可调性。通过荧光显微镜和 FSCV 确认了组织的活力。此外,我们还首次在肠道中用 FSCV 测量了同时的血清素和褪黑素信号。总的来说,该芯片在培养肠切片方面提供了显著的进展,并且具有直接测量和成像的附加优势。