Department of Thermodynamics and Environmental Engineering, Faculty of Mechanical Engineering, Brno University of Technology, Technicka 2896/2, 616 69 Brno, Czech Republic.
Institute of Physical and Applied Chemistry, Faculty of Chemistry, Brno University of Technology, Purkyňova 464/118, Královo Pole, 612 00 Brno, Czech Republic.
Mol Pharm. 2024 Apr 1;21(4):1848-1860. doi: 10.1021/acs.molpharmaceut.3c01146. Epub 2024 Mar 11.
Liposomal carrier systems have emerged as a promising technology for pulmonary drug delivery. This study focuses on two selected liposomal systems, namely, dipalmitoylphosphatidylcholine stabilized by phosphatidic acid and cholesterol (DPPC-PA-Chol) and dipalmitoylphosphatidylcholine stabilized by polyethylene glycol and cholesterol (DPPC-PEG-Chol). First, the research investigates the stability of these liposomal systems during the atomization process using different kinds of nebulizers (air-jet, vibrating mesh, and ultrasonic). The study further explores the aerodynamic particle size distribution of the aerosol generated by the nebulizers. The nebulizer that demonstrated optimal stability and particle size was selected for more detailed investigation, including Andersen cascade impactor measurements, an assessment of the influence of flow rate and breathing profiles on aerosol particle size, and an deposition study on a realistic replica of the upper airways. The most suitable combination of a nebulizer and liposomal system was DPPC-PA-Chol nebulized by a Pari LC Sprint Star in terms of stability and particle size. The influence of the inspiration flow rate on the particle size was not very strong but was not negligible either (decrease of by 1.34 μm with the flow rate increase from 8 to 60 L/min). A similar effect was observed for realistic transient inhalation. According to the deposition measurement, approximately 90% and 70% of the aerosol penetrated downstream of the trachea using the stationary flow rate and the realistic breathing profile, respectively. These data provide an image of the potential applicability of liposomal carrier systems for nebulizer therapy. Regional lung drug deposition is patient-specific; therefore, deposition results might vary for different airway geometries. However, deposition measurement with realistic boundary conditions (airway geometry, breathing profile) brings a more realistic image of the drug delivery by the selected technology. Our results show how much data from cascade impactor testing or estimates from the fine fraction concept differ from those of a more realistic case.
脂质体载体系统已成为肺部药物输送的有前途的技术。本研究集中于两种选定的脂质体系统,即由磷脂酸和胆固醇稳定的二棕榈酰磷脂酰胆碱(DPPC-PA-Chol)和由聚乙二醇和胆固醇稳定的二棕榈酰磷脂酰胆碱(DPPC-PEG-Chol)。首先,研究使用不同类型的雾化器(空气射流、振动网和超声)研究这些脂质体系统在雾化过程中的稳定性。研究进一步探讨了雾化器产生的气溶胶的空气动力学粒径分布。选择表现出最佳稳定性和粒径的雾化器进行更详细的研究,包括 Andersen 级联撞击器测量、评估流速和呼吸模式对气溶胶粒径的影响,以及在真实的上呼吸道复制品上的沉积研究。就稳定性和粒径而言,最适合的组合是 DPPC-PA-Chol 用 Pari LC Sprint Star 雾化器雾化。吸气流量对粒径的影响不是很强,但也不容忽视(流量从 8 升/分钟增加到 60 升/分钟时,粒径减小 1.34 微米)。在真实的瞬态吸入中也观察到类似的效果。根据沉积测量,使用固定流速和真实呼吸模式,大约 90%和 70%的气溶胶分别穿透气管下游。这些数据提供了脂质体载体系统在雾化器治疗中潜在适用性的图像。区域性肺部药物沉积是个体特异性的;因此,不同气道几何形状的沉积结果可能会有所不同。然而,使用真实边界条件(气道几何形状、呼吸模式)进行沉积测量可以更真实地反映所选技术的药物输送情况。我们的结果表明,级联撞击器测试的数据或细分数概念的估计与更真实情况的数据有多大差异。