Bartlett Harrison L, Shepherd Max K, Lawson Brian E
Little Room Innovations, LLC, Ann Arbor, MI, USA.
Department of Mechanical Engineering, Northeastern University, Boston, MA, USA.
Wearable Technol. 2023 May 15;4:e15. doi: 10.1017/wtc.2023.10. eCollection 2023.
The biological ankle dorsiflexes several degrees during swing to provide adequate clearance between the foot and ground, but conventional energy storage and return (ESR) prosthetic feet remain in their neutral position, increasing the risk of toe scuffs and tripping. We present a new prosthetic ankle intended to reduce fall risk by dorsiflexing the ankle joint during swing, thereby increasing the minimum clearance between the foot and ground. Unlike previous approaches to providing swing dorsiflexion such as powered ankles or hydraulic systems with dissipative yielding in stance, our ankle device features a spring-loaded linkage that adopts a neutral angle during stance, allowing ESR, but adopts a dorsiflexed angle during swing. The ankle unit was designed, fabricated, and assessed in level ground walking trials on a unilateral transtibial prosthesis user to experimentally validate its stance and swing phase behaviors. The assessment consisted of three conditions: the ankle in an operational configuration, the ankle in a locked configuration (unable to dorsiflex), and the subject's daily use ESR prosthesis. When the ankle was operational, minimum foot clearance (MFC) increased by 13 mm relative to the locked configuration and 15 mm relative to his daily use prosthesis. Stance phase energy return was not significantly impacted in the operational configuration. The increase in MFC provided by the passive dorsiflexing ankle prosthesis may be sufficient to decrease the rate of falls experienced by prosthesis users in the real world.
生物脚踝在摆动期会背屈几度,以便在足部与地面之间提供足够的间隙,但传统的能量储存与回馈(ESR)假脚在摆动期仍保持中立位置,增加了脚趾擦伤和绊倒的风险。我们提出了一种新型假脚踝,旨在通过在摆动期使踝关节背屈来降低跌倒风险,从而增加足部与地面之间的最小间隙。与以往提供摆动期背屈的方法不同,如动力脚踝或在站立期具有耗能屈服特性的液压系统,我们的脚踝装置具有一个弹簧加载连杆机构,该机构在站立期采用中立角度以实现能量储存与回馈,但在摆动期采用背屈角度。该脚踝单元在一名单侧经胫骨截肢者的平地行走试验中进行了设计、制造和评估,以通过实验验证其在站立期和摆动期的行为。评估包括三种情况:处于工作配置的脚踝、处于锁定配置(无法背屈)的脚踝以及受试者日常使用中的ESR假脚。当脚踝处于工作配置时,相对于锁定配置,最小足部间隙(MFC)增加了13毫米,相对于其日常使用的假脚增加了15毫米。在工作配置下,站立期的能量回馈没有受到显著影响。被动背屈式脚踝假肢所提供的MFC增加量可能足以降低假肢使用者在现实世界中的跌倒发生率。