Suppr超能文献

腰椎运动的立体放射摄影

Stereo radiography of lumbar spine motion.

作者信息

Pearcy M J

出版信息

Acta Orthop Scand Suppl. 1985;212:1-45. doi: 10.3109/17453678509154154.

Abstract

The technique of Biplanar Radiography for the computer analysis of orthogonal radiographs of the human spine enables the calculation of three-dimensional coordinates for anatomical landmarks on the vertebrae. Three-dimensional intervertebral movements are deduced from the changes in the relative orientations of the vertebrae as a subject moves from one position to another. The three-dimensional coordinates of the anatomical landmarks on the vertebrae were found to have an RMS error of less than 1 mm. The RMS errors for translational movements were less than 2 mm and for rotations were less than 1.5 degrees. This study of normal subjects has defined the ranges of voluntary flexion and extension, axial rotation, and lateral bending in the lumbar spines of young males. The range of flexion plus extension at each lumbar intervertebral joint is approximately 14 degrees with the L4/5 level being slightly more mobile than the others. There are approximately 2 degrees of axial rotation at each joint with L3/4 and L4/5 being slightly more mobile. Lateral bending of approximately 10 degrees occurs at the upper three levels while there is significantly less movement of 6 degrees and 3 degrees at L4/5 and L5/S1 respectively. In flexion and extension accompanying axial rotation of 2 degrees or more and lateral bending of 3 degrees or more occurred rarely and any larger accompanying rotation at an intervertebral joint should be considered abnormal. During twisting and side bending axial rotation to the right is accompanied by lateral bending to the left and vice versa at the three upper levels. At L5/S1 axial rotation and lateral bending generally accompany each other in the same direction while L4/5 is a transitional level. During lateral bending there is also generally extension at the upper levels and flexion at L5/S1. The measurement in vivo of the accompanying rotations in the other planes has demonstrated that there is no simple mechanical coupling of the rotations. Finally, this study has provided a base line of normal movements to which the movements seen in pathological conditions can be compared.

摘要

双平面X线摄影技术用于人体脊柱正交X线片的计算机分析,能够计算椎骨上解剖标志点的三维坐标。当受试者从一个位置移动到另一个位置时,根据椎骨相对方位的变化推断三维椎间运动。发现椎骨上解剖标志点的三维坐标的均方根误差小于1毫米。平移运动的均方根误差小于2毫米,旋转运动的均方根误差小于1.5度。这项对正常受试者的研究确定了年轻男性腰椎的主动屈伸、轴向旋转和侧屈范围。每个腰椎椎间关节的屈伸范围约为14度,L4/5节段的活动度略高于其他节段。每个关节的轴向旋转约为2度,L3/4和L4/5节段的活动度略高。上三个节段的侧屈约为10度,而L4/5和L5/S1节段的活动度明显较小,分别为6度和3度。在屈伸过程中,伴随2度或以上轴向旋转和3度或以上侧屈的情况很少见,椎间关节任何更大的伴随旋转都应视为异常。在扭转和侧弯过程中,上三个节段向右的轴向旋转伴随着向左的侧屈,反之亦然。在L5/S1节段,轴向旋转和侧屈通常在同一方向上同时发生,而L4/5节段是一个过渡节段。在侧屈过程中,上节段通常也会伸展,而L5/S1节段会屈曲。对其他平面伴随旋转的体内测量表明,旋转之间不存在简单的机械耦合。最后,这项研究提供了一个正常运动的基线,可用于与病理情况下的运动进行比较。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验