Musculoskeletal Institute, Geisinger, Danville, PA, USA.
Department of Mechanical Engineering, Bucknell University, 1 Dent Drive, Lewisburg, PA, 17837, USA.
Sci Rep. 2024 May 7;14(1):10448. doi: 10.1038/s41598-024-61325-7.
Hip muscle weakness can be a precursor to or a result of lower limb injuries. Assessment of hip muscle strength and muscle motor fatigue in the clinic is important for diagnosing and treating hip-related impairments. Muscle motor fatigue can be assessed with surface electromyography (sEMG), however sEMG requires specialized equipment and training. Inertial measurement units (IMUs) are wearable devices used to measure human motion, yet it remains unclear if they can be used as a low-cost alternative method to measure hip muscle fatigue. The goals of this work were to (1) identify which of five pre-selected exercises most consistently and effectively elicited muscle fatigue in the gluteus maximus, gluteus medius, and rectus femoris muscles and (2) determine the relationship between muscle fatigue using sEMG sensors and knee wobble using an IMU device. This work suggests that a wall sit and single leg knee raise activity fatigue the gluteus medius, gluteus maximus, and rectus femoris muscles most reliably (p < 0.05) and that the gluteus medius and gluteus maximus muscles were fatigued to a greater extent than the rectus femoris (p = 0.031 and p = 0.0023, respectively). Additionally, while acceleration data from a single IMU placed on the knee suggested that more knee wobble may be an indicator of muscle fatigue, this single IMU is not capable of reliably assessing fatigue level. These results suggest the wall sit activity could be used as simple, static exercise to elicit hip muscle fatigue in the clinic, and that assessment of knee wobble in addition to other IMU measures could potentially be used to infer muscle fatigue under controlled conditions. Future work examining the relationship between IMU data, muscle fatigue, and multi-limb dynamics should be explored to develop an accessible, low-cost, fast and standardized method to measure fatiguability of the hip muscles in the clinic.
髋关节肌肉无力可能是下肢损伤的前兆或结果。在诊所评估髋关节肌肉力量和肌肉运动疲劳对于诊断和治疗与髋关节相关的损伤很重要。可以使用表面肌电图(sEMG)评估肌肉运动疲劳,但 sEMG 需要专门的设备和培训。惯性测量单元(IMU)是用于测量人体运动的可穿戴设备,但尚不清楚它们是否可以用作替代低成本方法来测量髋关节肌肉疲劳。这项工作的目的是:(1)确定五种预先选择的运动中哪一种最能一致且有效地引起臀大肌、臀中肌和股直肌的肌肉疲劳;(2)确定使用 sEMG 传感器测量肌肉疲劳与使用 IMU 设备测量膝关节摆动之间的关系。这项工作表明,靠墙坐和单腿膝盖抬高活动最可靠地(p<0.05)使臀中肌、臀大肌和股直肌疲劳,并且臀中肌和臀大肌比股直肌疲劳程度更大(p=0.031 和 p=0.0023,分别)。此外,虽然放置在膝盖上的单个 IMU 的加速度数据表明更多的膝关节摆动可能是肌肉疲劳的指标,但单个 IMU 无法可靠地评估疲劳水平。这些结果表明,靠墙坐活动可用于在诊所中引起髋关节肌肉疲劳的简单、静态运动,并且除其他 IMU 措施外评估膝关节摆动可能潜在地用于在受控条件下推断肌肉疲劳。应探索检查 IMU 数据、肌肉疲劳和多肢体动力学之间关系的未来工作,以开发一种易于访问、低成本、快速且标准化的方法,在诊所中测量髋关节肌肉的疲劳性。