Suppr超能文献

通过热硫化实现化学气相沉积石墨烯的缺陷修复与掺杂

Defect healing and doping of CVD graphene by thermal sulfurization.

作者信息

Bianco Giuseppe Valerio, Sacchetti Alberto, Milella Antonella, Giangregorio Maria Michela, Dicorato Stefano, Bruno Giovanni

机构信息

Institute of Nanotechnology, CNR-NANOTEC, Dipartimento di Chimica, Università di Bari via Orabona, 4 Bari 70126 Italy

Dipartimento di Chimica, Università di Bari via Orabona, 4 Bari 70126 Italy.

出版信息

Nanoscale Adv. 2024 Apr 9;6(10):2629-2635. doi: 10.1039/d4na00124a. eCollection 2024 May 14.

Abstract

CVD graphene layers are intrinsically polycrystalline; depending on grain size, their structure at the atomic level is scarcely free of defects, which affects the properties of graphene. On the one hand, atomic-scale defects act as scattering centers and lead to a loss of carrier mobility. On the other hand, structural disorder at grain boundaries provides additional resistance in series that affects material conductivity. Graphene chemical functionalization has been demonstrated to be an effective way to improve its conductivity mainly by increasing carrier concentration. The present study reports the healing effects of sulfur doping on the electrical transport properties of single-layer CVD graphene. A post-growth thermal sulfurization process operating at 250 °C is applied on single layers of graphene on Corning-glass and Si/SiO substrates. XPS and Raman analyses reveal the covalent attachment of sulfur atoms in graphene carbon lattice without creating new C-sp defects. Measurements of transport properties show a significant improvement in hole mobility as revealed by Hall measurements and related material conductivity. Typically, Hall mobility values as high as 2500 cm V s and sheet resistance as low as 400 Ohm per square are measured on single-layer sulfurized graphene.

摘要

化学气相沉积(CVD)生长的石墨烯层本质上是多晶的;根据晶粒尺寸,其原子级结构几乎都存在缺陷,这会影响石墨烯的性能。一方面,原子尺度的缺陷充当散射中心,导致载流子迁移率降低。另一方面,晶界处的结构无序提供了额外的串联电阻,影响材料的导电性。石墨烯化学功能化已被证明是一种主要通过增加载流子浓度来提高其导电性的有效方法。本研究报告了硫掺杂对单层化学气相沉积石墨烯电输运性质的修复作用。在康宁玻璃和硅/二氧化硅衬底上的单层石墨烯上进行了在250°C下的生长后热硫化处理。X射线光电子能谱(XPS)和拉曼分析表明,硫原子共价附着在石墨烯碳晶格中,且未产生新的C-sp缺陷。输运性质测量表明,通过霍尔测量和相关材料电导率可知,空穴迁移率有显著提高。通常,在单层硫化石墨烯上测得的霍尔迁移率值高达2500 cm² V⁻¹ s⁻¹,方块电阻低至400欧姆每平方。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22ec/11093272/2f45b77fc5b9/d4na00124a-f1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验