Department of Diagnostic Radiology, Lund University, Lund, Sweden.
Danish Research Centre for Magnetic Resonance, Centre for Functional and Diagnostic Imaging and Research, Copenhagen University Hospital - Amager and Hvidovre, Copenhagen, Denmark.
NMR Biomed. 2024 Nov;37(11):e5208. doi: 10.1002/nbm.5208. Epub 2024 Jul 4.
Filter exchange imaging (FEXI) is a double diffusion-encoding (DDE) sequence that is specifically sensitive to exchange between sites with different apparent diffusivities. FEXI uses a diffusion-encoding filtering block followed by a detection block at varying mixing times to map the exchange rate. Long mixing times enhance the sensitivity to exchange, but they pose challenges for imaging applications that require a stimulated echo sequence with crusher gradients. Thin imaging slices require strong crushers, which can introduce significant diffusion weighting and bias exchange rate estimates. Here, we treat the crushers as an additional encoding block and consider FEXI as a triple diffusion-encoding sequence. This allows the bias to be corrected in the case of multi-Gaussian diffusion, but not easily in the presence of restricted diffusion. Our approach addresses challenges in the presence of restricted diffusion and relies on the ability to independently gauge sensitivities to exchange and restricted diffusion for arbitrary gradient waveforms. It follows two principles: (i) the effects of crushers are included in the forward model using signal cumulant expansion; and (ii) timing parameters of diffusion gradients in filter and detection blocks are adjusted to maintain the same level of restriction encoding regardless of the mixing time. This results in the tuned exchange imaging (TEXI) protocol. The accuracy of exchange mapping with TEXI was assessed through Monte Carlo simulations in spheres of identical sizes and gamma-distributed sizes, and in parallel hexagonally packed cylinders. The simulations demonstrate that TEXI provides consistent exchange rates regardless of slice thickness and restriction size, even with strong crushers. However, the accuracy depends on b-values, mixing times, and restriction geometry. The constraints and limitations of TEXI are discussed, including suggestions for protocol adaptations. Further studies are needed to optimize the precision of TEXI and assess the approach experimentally in realistic, heterogeneous substrates.
滤过交换成像(FEXI)是一种双扩散编码(DDE)序列,专门用于检测具有不同表观扩散系数的部位之间的交换。FEXI 使用扩散编码滤波块,然后在不同的混合时间使用检测块来绘制交换率。长的混合时间可以提高对交换的灵敏度,但它们对需要具有碎裂梯度的激发回波序列的成像应用构成了挑战。薄的成像切片需要强大的碎裂梯度,这会引入显著的扩散加权和交换率估计偏差。在这里,我们将碎裂梯度视为附加编码块,并将 FEXI 视为三重扩散编码序列。这允许在多高斯扩散的情况下进行偏差校正,但在受限扩散的情况下则不容易。我们的方法解决了受限扩散存在的挑战,并依赖于能够独立评估任意梯度波形的交换和受限扩散的灵敏度。它遵循两个原则:(i)使用信号累积展开将碎裂梯度的影响包括在正向模型中;(ii)调整滤波和检测块中扩散梯度的定时参数,以保持无论混合时间如何,受限编码的水平相同。这导致了调谐交换成像(TEXI)协议。通过在相同尺寸和伽马分布尺寸的球体以及平行六边形填充圆柱中进行的蒙特卡罗模拟,评估了 TEXI 进行交换映射的准确性。模拟结果表明,无论切片厚度和受限尺寸如何,TEXI 都能提供一致的交换率,即使使用强大的碎裂梯度也是如此。然而,准确性取决于 b 值、混合时间和受限几何形状。讨论了 TEXI 的限制和局限性,包括协议适应的建议。需要进一步的研究来优化 TEXI 的精度,并在现实、异质基质中进行实验评估该方法。