Department of Biomedical Engineering, University of Wisconsin-Milwaukee, Milwaukee, WI, 53211, USA.
Biomed Eng Online. 2024 Aug 30;23(1):88. doi: 10.1186/s12938-024-01278-0.
Remodeling (re-engineering) of a tumor's stroma has been shown to improve the efficacy of anti-tumor therapies, without destroying the stroma. Even though it still remains unclear which stromal component/-s and what characteristics hinder the reach of nanoparticles deep into cancer cells, we hypothesis that mechanisms behind stroma's resistance to the penetration of nanoparticles rely heavily on extrinsic mechanical forces on stromal cells and cancer cells. Our hypothesis has been formulated on the basis of our previous study which has shown that changes in extracellular matrix (ECM) stiffness with tumor growth influence stresses exerted on fibroblasts and cancer cells, and that malignant cancer cells generate higher stresses on their stroma. This study attempts to establish a distinct identification of the components' remodeling on the distribution and magnitude of stress within a tumor tissue which ultimately will impact the resistance of stroma to treatment. In this study, our objective is to construct a three-dimensional in silico model of a pancreas tumor tissue consisting of cancer cells, stromal cells, and ECM to determine how stromal remodeling alters the stresses distribution and magnitude within the pancreas tumor tissue. Our results show that changes in mechanical properties of ECM significantly alter the magnitude and distribution of stresses within the pancreas tumor tissue. Our results revealed that these stresses are more sensitive to ECM properties as we see the stresses reaching to a maximum of 22,000 Pa for softer ECM with Young's modulus of 250 Pa. The stress distribution and magnitude within the pancreas tumor tissue does not show high sensitivity to the changes in mechanical properties of stromal cells surrounding stiffer cancer cells (PANC-1 with Young's modulus of 2400 Pa). However, softer cancer cells (MIA-PaCa-2 with (Young's modulus of 500 Pa) increase the stresses experienced by stiffer stromal cells and for stiffer ECM. By providing a unique platform to dissect and quantify the impact of individual stromal components on the stress distribution within a tumor tissue, this study serves as an important first step in understanding of which stromal components are vital for an efficient remodeling. This knowledge will be leveraged to overcome a tumor's resistance against the penetration of nanoparticles on a per-patient basis.
肿瘤基质的重塑(重新设计)已被证明可以提高抗肿瘤疗法的疗效,而不会破坏基质。尽管目前仍不清楚哪种基质成分/特征会阻碍纳米颗粒深入癌细胞,但我们假设基质对纳米颗粒穿透的阻力机制在很大程度上依赖于基质细胞和癌细胞的外在机械力。我们的假设是基于我们之前的研究提出的,该研究表明肿瘤生长过程中细胞外基质(ECM)硬度的变化会影响成纤维细胞和癌细胞所受的应力,而且恶性癌细胞会对其基质产生更高的应力。这项研究试图确定肿瘤组织内分布和大小的应力中各成分重塑的独特识别,这最终将影响基质对治疗的抵抗力。在这项研究中,我们的目标是构建一个由癌细胞、基质细胞和 ECM 组成的胰腺肿瘤组织的三维计算机模型,以确定基质重塑如何改变胰腺肿瘤组织内的应力分布和大小。我们的研究结果表明, ECM 力学性能的变化显著改变了胰腺肿瘤组织内的应力分布和大小。我们的研究结果表明,这些应力对 ECM 特性更为敏感,因为我们看到在 ECM 的杨氏模量为 250Pa 时,应力达到了 22000Pa 的最大值。在胰腺肿瘤组织内,应力分布和大小对周围更硬的癌细胞(杨氏模量为 2400Pa 的 PANC-1)的基质细胞力学性能的变化不敏感。然而,较软的癌细胞(杨氏模量为 500Pa 的 MIA-PaCa-2)会增加较硬的基质细胞和 ECM 所经历的应力。通过提供一个独特的平台来剖析和量化单个基质成分对肿瘤组织内应力分布的影响,这项研究是理解哪些基质成分对有效的重塑至关重要的重要的第一步。这一知识将被用来克服肿瘤对纳米颗粒穿透的阻力,这是一个基于每个患者的基础。