Deposition of CdSe Nanocrystals in Highly Porous SiO Matrices-In Situ Growth vs. Infiltration Methods.

Embedding quantum dots into porous matrices is a very beneficial approach for generating hybrid nanostructures with unique properties. In this contribution we explore strategies to dope nanoporous SiO thin films made by atomic layer deposition and selective wet chemical etching with precise control over pore size with CdSe quantum dots. Two distinct strategies were employed for quantum dot deposition: in situ growth of CdSe nanocrystals within the porous matrix via successive ionic layer adsorption reaction, and infiltration of pre-synthesized quantum dots. To address the impact of pore size, layers with 10 nm and 30 nm maximum pore diameter were used as the matrix. Our results show that though small pores are potentially accessible for the in situ approach, this strategy lacks controllability over the nanocrystal quality and size distribution. To dope layers with high-quality quantum dots with well-defined size distribution and optical properties, infiltration of preformed quantum dots is much more promising. It was observed that due to higher pore volume, 30 nm porous silica shows higher loading after treatment than the 10 nm porous silica matrix. This can be related to a better accessibility of the pores with higher pore size. The amount of infiltrated quantum dots can be influenced via drop-casting of additional solvents on a pre-drop-casted porous matrix as well as via varying the soaking time of a porous matrix in a quantum dot solution. Luminescent quantum dots deposited via this strategy keep their luminescent properties, and the resulting thin films with immobilized quantum dots are suited for integration into optoelectronic devices.