Demirkır Çayan, Wood Jeffery A, Lohse Detlef, Krug Dominik
Physics of Fluids, University of Twente, Enschede 7500 AE, The Netherlands.
Soft Matter, Fluidics, and Interfaces, University of Twente, Enschede 7500 AE, The Netherlands.
Langmuir. 2024 Oct 1;40(39):20474-20484. doi: 10.1021/acs.langmuir.4c01963. Epub 2024 Sep 21.
We present an experimental study on detachment characteristics of hydrogen bubbles during electrolysis. Using a transparent (Pt or Ni) electrode enables us to directly observe the bubble contact line and bubble size. Based on these quantities we determine other parameters such as the contact angle and volume through solutions of the Young-Laplace equation. We observe bubbles without ("pinned bubbles") and with ("spreading bubbles") contact line spreading and find that the latter mode becomes more prevalent if the concentration of HClO is ≥0.1 M. The departure radius for spreading bubbles is found to drastically exceed the value predicted by the well-known formula of W. Fritz [ , , 379-384] for this case. We show that this is related to the contact line hysteresis, which leads to pinning of the contact line after an initial spreading phase at the receding contact angle. The departure mode is then similar to a pinned bubble and occurs once the contact angle reaches the advancing contact angle of the surface. A prediction for the departure radius based on these findings is found to be consistent with the experimental data.
我们展示了一项关于电解过程中氢气泡脱离特性的实验研究。使用透明(铂或镍)电极使我们能够直接观察气泡接触线和气泡大小。基于这些量,我们通过杨 - 拉普拉斯方程的解来确定其他参数,如接触角和体积。我们观察到无接触线扩展(“固定气泡”)和有接触线扩展(“扩展气泡”)的气泡,并发现如果次氯酸浓度≥0.1 M,后一种模式会变得更为普遍。对于扩展气泡,发现其脱离半径大大超过了针对这种情况由W. 弗里茨 [ , , 379 - 384] 的著名公式所预测的值。我们表明这与接触线滞后有关,这会导致在初始扩展阶段后接触线在后退接触角处固定。然后脱离模式类似于固定气泡,并且在接触角达到表面的前进接触角时发生。基于这些发现对脱离半径的预测与实验数据一致。