Kazim Abbas Naqvi Syed Muhammad, Abbas Faheem, Bibi Sadaf, Shehzad Muhammad Kamran, Alhokbany Norah, Zhu Yanan, Long Hui, Vasiliev Roman B, Nazir Zahid, Chang Shuai
Faculty of Materials Science, Shenzhen MSU-BIT University Shenzhen 518115 China
Platform for Applied Nanophotonics, Institute of Advanced Interdisciplinary Technology, Shenzhen MSU-BIT University Shenzhen 518115 China.
RSC Adv. 2024 Sep 20;14(41):29942-29954. doi: 10.1039/d4ra04818k. eCollection 2024 Sep 18.
Achieving high power conversion efficiency (PCE) remains a significant challenge in the advancement of organic solar cells (OSCs). In the field of organic photovoltaics (OPVs), considerable progress has been made in optimizing molecular structures to improve the PCE. However, innovative material design strategies specifically aimed at enhancing PCE are still needed. Here, we have designed BDTS-2DPP-based molecules and propose a molecular design approach to develop donor materials that can significantly improve the PCE of OSCs. Density functional theory (DFT) and time-dependent DFT (TD-DFT) methods have been adopted in both gas and solvent phases. Our newly designed molecule M1 shows the highest absorption value ( = 846 nm), highest electron reorganization energy ( = 0.18 eV), and the lowest energy gap ( = 1.81 eV) among all the designed molecules. M1 molecule also exhibits the highest dipole moment in both gas (10.62 D) and solvent phase (13.62 D), and their ground and excited state dipole moment difference is also higher ( - = 2.99 D), which enhances its separation to make it a suitable candidate for charge transfer between HOMO-LUMO (97%). Newly designed molecule M3 is observed to have the highest voltage when the current is zero ( = 1.15 V) highest PCE value (21.90%) and highest fill factor (FF) value (89.42%). The lowest excitation binding energy is estimated by newly designed molecule M2 ( = 0.30 eV), which indicates a higher rate of dissociation during the excitation as observed in transition density matrix (TDM) plots. Utilizing electron density difference maps, the newly designed molecules in dichloromethane solvent exhibited consistent intramolecular charge transfer (ICT). The designed molecules were evaluated against reference molecule R to determine if they exhibit superior optoelectronic capabilities. It is found that all designed molecules (M1-M5) exhibit reduced band gaps, are red-shifted in wavelength in comparison to a reference molecule R, and have remarkable charge motilities in terms of reorganisation energies.
在有机太阳能电池(OSC)的发展过程中,实现高功率转换效率(PCE)仍然是一项重大挑战。在有机光伏(OPV)领域,通过优化分子结构来提高PCE已经取得了相当大的进展。然而,仍需要专门针对提高PCE的创新材料设计策略。在此,我们设计了基于BDTS-2DPP的分子,并提出了一种分子设计方法来开发能够显著提高OSC的PCE的供体材料。在气相和溶剂相中均采用了密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)方法。我们新设计的分子M1在所有设计分子中显示出最高的吸收值(λ = 846 nm)、最高的电子重组能(λ = 0.18 eV)和最低的能隙(λ = 1.81 eV)。M1分子在气相(10.62 D)和溶剂相(13.62 D)中也表现出最高的偶极矩,并且它们的基态和激发态偶极矩差也更高(λ - λ = 2.99 D),这增强了其分离效果,使其成为HOMO-LUMO之间电荷转移的合适候选者(97%)。观察到新设计的分子M3在电流为零时具有最高电压(λ = 1.15 V)、最高PCE值(21.90%)和最高填充因子(FF)值(89.42%)。新设计的分子M2估计具有最低的激发结合能(λ = 0.30 eV),这表明在激发过程中解离速率较高,如在跃迁密度矩阵(TDM)图中所观察到的。利用电子密度差图,新设计的分子在二氯甲烷溶剂中表现出一致的分子内电荷转移(ICT)。将设计的分子与参考分子R进行评估,以确定它们是否表现出优异的光电能力。发现所有设计分子(M1 - M5)的带隙均减小,与参考分子R相比波长发生红移,并且在重组能方面具有显著的电荷迁移率。