Suppr超能文献

解析 pH 值、钠离子浓度和培养基渗透压对分批培养过程中嗜盐菌的影响。

Unraveling the impact of pH, sodium concentration, and medium osmolality on Vibrio natriegens in batch processes.

机构信息

AVT- Biochemical Engineering, RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany.

出版信息

BMC Biotechnol. 2024 Sep 23;24(1):63. doi: 10.1186/s12896-024-00897-8.

Abstract

BACKGROUND

Vibrio natriegens, a halophilic marine γ-proteobacterium, holds immense biotechnological potential due to its remarkably short generation time of under ten minutes. However, the highest growth rates have been primarily observed on complex media, which often suffer from batch-to-batch variability affecting process stability and performance. Consistent bioprocesses necessitate the use of chemically defined media, which are usually optimized for fermenters with pH and dissolved oxygen tension (DOT) regulation, both of which are not applied during early-stage cultivations in shake flasks or microtiter plates. Existing studies on V. natriegens' growth on mineral media report partially conflicting results, and a comprehensive study examining the combined effects of pH buffering, sodium concentration, and medium osmolality is lacking.

RESULTS

This study evaluates the influence of sodium concentration, pH buffering, and medium osmolality on the growth of V. natriegens under unregulated small-scale conditions. The maximum growth rate, time of glucose depletion, as well as the onset of stationary phase were observed through online-monitoring the oxygen transfer rate. The results revealed optimal growth conditions at an initial pH of 8.0 with a minimum of 300 mM MOPS buffer for media containing 20 g/L glucose or 180 mM MOPS for media with 10 g/L glucose. Optimal sodium chloride supplementation was found to be between 7.5 and 15 g/L, lower than previously reported ranges. This is advantageous for reducing industrial corrosion issues. Additionally, an osmolality range of 1 to 1.6 Osmol/kg was determined to be optimal for growth. Under these optimized conditions, V. natriegens achieved a growth rate of 1.97 ± 0.13 1/h over a period of 1 h at 37 °C, the highest reported rate for this organism on a mineral medium.

CONCLUSION

This study provides guidelines for cultivating V. natriegens in early-stage laboratory settings without pH and DOT regulation. The findings suggest a lower optimal sodium chloride range than previously reported and establish an osmolality window for optimal growth, thereby advancing the understanding of V. natriegens' physiology. In addition, this study offers a foundation for future research into the effects of different ions and carbon sources on V. natriegens.

摘要

背景

嗜盐海洋γ-变形菌威氏气单胞菌由于其极短的代时(不到十分钟),具有巨大的生物技术潜力。然而,最高的生长速率主要是在复杂的培养基中观察到的,而这些培养基通常存在批次间变异性,影响过程稳定性和性能。一致的生物工艺需要使用化学成分确定的培养基,这些培养基通常是针对具有 pH 和溶解氧张力(DOT)调节的发酵罐进行优化的,而在摇瓶或微量滴定板中的早期培养阶段并不应用这些调节。关于威氏气单胞菌在矿物培养基上生长的现有研究报告了部分相互矛盾的结果,并且缺乏对 pH 缓冲、钠离子浓度和培养基渗透压综合影响的全面研究。

结果

本研究评估了在不受调节的小规模条件下,钠离子浓度、pH 缓冲和培养基渗透压对威氏气单胞菌生长的影响。通过在线监测氧传递率,观察到最大生长速率、葡萄糖耗尽时间以及静止期的开始。结果表明,在初始 pH 为 8.0 时,使用最低 300 mM MOPS 缓冲液的条件下,对于含有 20 g/L 葡萄糖的培养基,或者使用 10 g/L 葡萄糖的培养基中使用 180 mM MOPS 时,生长条件最佳。最佳氯化钠补充量被发现介于 7.5 和 15 g/L 之间,低于先前报道的范围。这有利于减少工业腐蚀问题。此外,确定 1 至 1.6 Osmol/kg 的渗透压范围对生长是最佳的。在这些优化条件下,威氏气单胞菌在 37°C 下 1 小时内的生长速率达到 1.97±0.13 1/h,这是该生物体在矿物培养基上的最高报道速率。

结论

本研究为在没有 pH 和 DOT 调节的早期实验室环境中培养威氏气单胞菌提供了指导。研究结果表明,与先前报道的相比,最佳氯化钠范围较低,并建立了最佳生长的渗透压窗口,从而推进了对威氏气单胞菌生理学的理解。此外,本研究为研究不同离子和碳源对威氏气单胞菌的影响奠定了基础。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/ba62/11421182/cdeb27d068df/12896_2024_897_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验