Impact of high-speed nanodroplets on various pathogenic bacterial cell walls.

UNLABELLED

Although the development of disinfection technologies with novel mechanisms has stagnated, we demonstrate the bactericidal effects and mechanisms of high-speed nanodroplet generation technology. The first development of this technology in 2017 gushes out a water droplet of 10 nm in size at 50 m/s; however, the target surface does not become completely wet. Nanodroplets were exposed to biofilm models of , , , and . This phenomenon was verified when the nanodroplets collide with the surface of the bacteria at an impact pressure of ~75 MPa. was exposed to nanodroplets for 30 seconds at 75 MPa, which exploded the bacterial body and completely sterilized. Eighteen MPa damaged the bacterial surface, causing peptidoglycan leakage. was repaired and survives in this state. In contrast, in Gram-negative bacteria, nanodroplets with 18 MPa penetrated some biofilm-forming bacteria but did not hit all of them, and the viable count was not significantly reduced. Although all three bacterial species were completely sterilized at 75 MPa, the disinfectant effect was affected by the biomass of the biofilm formed. In summary, our findings prove that nanodroplets at 18 MPa on the bacterial surface were ineffective in killing bacteria, whereas at 75 MPa, all four bacterial species were completely sterilized. The disinfection mechanism involved a high-velocity collision of nanodroplets with the bacteria, physically destroying them. Our results showed that disinfection using this technology could be an innovative method that is completely different from existing disinfection techniques.

IMPORTANCE

Although existing disinfection techniques demonstrate bactericidal effects through chemical reactions, concerns regarding human toxicity and environmental contamination have been raised. To the best of our knowledge, this study is the first in the world to reveal that the use of this technology, with nanodroplets of less than 100 nm, can destroy and sterilize bacterial cells by colliding with biofilm-forming bacteria at 75 MPa. Furthermore, because this technology uses only water, it can solve the problems of human toxicity and environmental contamination caused by existing disinfection techniques. Because of its minimal water usage, it can be employed for sanitation worldwide without being limited to specific regions. Our report proposes an unprecedented physical disinfection approach that utilizes a high-speed nanodroplet generation technology.