Ahmed Sobur, Imon Sajib Sarker, Hasan Md Jawad, Alam Md Samaul
Department of Leather Engineering, Institute of Leather Engineering and Technology, University of Dhaka, 44-50, Hazaribagh, Dhaka-1209, Bangladesh.
Heliyon. 2024 Oct 12;10(20):e39170. doi: 10.1016/j.heliyon.2024.e39170. eCollection 2024 Oct 30.
Antimicrobial nanomaterials have received a lot of interest in recent years due to their potential to fight against microbial degradation, a common problem in leather products. In this study, a nanocomposite was synthesized with MgO nanoparticles prepared by Aloe vera leaf extract and chitosan (CS), as an innovative solution to this problem. Three nanocomposite samples (C1, C2, and C3) were formulated with varying ratios of MgO and chitosan and evaluated for antimicrobial efficacy against and Bacillus subtilis. Leather treated with MgO/Chitosan nanocomposite (MgO/Chitosan-1:1) exhibited substantial inhibition zones of 13 mm and 12 mm against and , respectively. Characterization of MgO nanoparticles, chitosan, and MgO/CS nanocomposite was performed through FTIR, XRD, SEM, TGA, and cytotoxicity tests. The average particle size and crystallite size of MgO nanoparticles were found as 136 nm and 10.3 nm, respectively and a weight loss of 67 % for MgO/CS nanocomposite in thermogravimetric analysis. FTIR confirmed the successful incorporation of MgO nanoparticles into the chitosan matrix, evidenced by the presence of characteristic functional groups. Application of nanocomposite onto lining leather via spraying resulted in finished leather with improved color rub fastness, perspiration fastness, and thermal stability compared to untreated leather. In comparison to dry color rub fastness, wet color rub fastness was notably improved by the MgO/CS nanocomposite, with gray scale ratings ranging from 4/5 to 5. Perspiration fastness was marginally enhanced by the MgO/CS coating, with gray scale ratings ranging from 4/5 to 5 for both grain and flesh samples. Specifically, the coated leather exhibited a water vapor permeability (WVP) of 9.94 mg cm.hr that was lower than both uncoated (12.37 mg cm.hr) and PVA-coated (11.22 mg cm.hr) leather. This study presents a promising solution to the challenge of microbial degradation in leather products and highlights the potential of natural sources for synthesizing functional nanocomposites with diverse applications in materials science and biotechnology.
近年来,抗菌纳米材料因其具有对抗微生物降解的潜力而备受关注,微生物降解是皮革制品中常见的问题。在本研究中,以芦荟叶提取物制备的氧化镁纳米颗粒和壳聚糖(CS)合成了一种纳米复合材料,作为解决该问题的创新方案。制备了三种不同氧化镁与壳聚糖比例的纳米复合材料样品(C1、C2和C3),并评估了其对大肠杆菌和枯草芽孢杆菌的抗菌效果。用氧化镁/壳聚糖纳米复合材料(氧化镁/壳聚糖-1:1)处理的皮革对大肠杆菌和枯草芽孢杆菌分别表现出13毫米和12毫米的显著抑菌圈。通过傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、热重分析(TGA)和细胞毒性测试对氧化镁纳米颗粒、壳聚糖和氧化镁/壳聚糖纳米复合材料进行了表征。氧化镁纳米颗粒的平均粒径和微晶尺寸分别为136纳米和10.3纳米,在热重分析中氧化镁/壳聚糖纳米复合材料的失重率为67%。FTIR证实了氧化镁纳米颗粒成功地掺入壳聚糖基质中,特征官能团的存在证明了这一点。通过喷涂将纳米复合材料应用于衬里皮革,与未处理的皮革相比,成品皮革的耐摩擦色牢度、耐汗渍色牢度和热稳定性得到了改善。与干摩擦色牢度相比,氧化镁/壳聚糖纳米复合材料显著提高了湿摩擦色牢度,灰度评级为4/5至5级。氧化镁/壳聚糖涂层略微提高了耐汗渍色牢度,粒面和肉面样品的灰度评级均为4/5至5级。具体而言,涂层皮革的水蒸气透过率(WVP)为9.94毫克·厘米·小时,低于未涂层皮革(12.37毫克·厘米·小时)和聚乙烯醇涂层皮革(11.22毫克·厘米·小时)。本研究为皮革制品中微生物降解的挑战提供了一个有前景的解决方案,并突出了天然来源在合成具有材料科学和生物技术多种应用的功能性纳米复合材料方面的潜力。