Kato Eiji, Yamada Masahiro, Kokubu Eitoyo, Egusa Hiroshi, Ishihara Kazuyuki
Department of Microbiology, Tokyo Dental College, Tokyo, 101-0061, Japan.
Implant & Tissue Engineering Dental Network-Tokyo, 153-0051, Tokyo, Japan.
Mater Today Bio. 2024 Nov 22;29:101352. doi: 10.1016/j.mtbio.2024.101352. eCollection 2024 Dec.
Anti-microbial nanopatterns have attracted considerable attention; however, its principle is not yet fully understood, particularly for inorganic nanopatterns. Titanium nanosurfaces with dense and anisotropically patterned nanospikes regulate biological functions with multiple physical stimulations, which may be because of the nanopattern-induced alternation of surface physical properties. This study aimed to determine the antimicrobial capability of titanium nanosurfaces and their mechanisms. Two types of alkali-etched titanium nanosurfaces with isotropically or anisotropically patterned nanospikes had markedly denser surface protrusions, greater superhydrophilicity, and greater negative charge than machined or micro-roughened titanium surfaces. The crystallographic properties of anisotropic titanium nanosurfaces were similar to those of isotropic nanosurfaces, but markedly higher in electric reactivity at nanoscale. The maximum value of the contact potential difference on titanium surfaces was significantly correlated with the product of the density and anisotropy in the distribution pattern of surface protrusions. Isotropic titanium nanosurfaces did not inhibit the attachment of gram-positive cocci, such as , whereas anisotropic titanium nanosurfaces substantially inhibited gram-positive cocci attachment. Most gram-negative bacilli, , died via swelling of the cell body on anisotropic titanium nanosurfaces within 6 h of incubation, in contrast to other titanium surfaces where most of the cells did not lose viability or undergo morphological changes. The extent of cell swelling was positively correlated with the electric reactivity of the titanium surfaces. Titanium nanosurfaces with anisotropically patterned dense nanospikes exerted anti-biofouling or mechano-bactericidal effects on gram-positive or negative bacteria with electrical cue induced by the anisotropy of the nanospike patterns.
抗菌纳米图案已引起了广泛关注;然而,其原理尚未完全明确,尤其是对于无机纳米图案而言。具有密集且各向异性图案化纳米尖峰的钛纳米表面通过多种物理刺激来调节生物学功能,这可能是由于纳米图案引起的表面物理性质的改变。本研究旨在确定钛纳米表面的抗菌能力及其作用机制。与机械加工或微粗糙化的钛表面相比,两种具有各向同性或各向异性图案化纳米尖峰的碱蚀刻钛纳米表面具有明显更密集的表面突起、更高的超亲水性和更大的负电荷。各向异性钛纳米表面的晶体学性质与各向同性纳米表面相似,但在纳米尺度上的电反应性明显更高。钛表面接触电位差的最大值与表面突起分布图案的密度和各向异性的乘积显著相关。各向同性钛纳米表面不抑制革兰氏阳性球菌(如 )的附着,而各向异性钛纳米表面则显著抑制革兰氏阳性球菌的附着。大多数革兰氏阴性杆菌( )在与各向异性钛纳米表面孵育6小时内通过细胞体肿胀而死亡,相比之下,在其他钛表面上,大多数细胞没有失去活力或发生形态变化。细胞肿胀程度与钛表面的电反应性呈正相关。具有各向异性图案化密集纳米尖峰的钛纳米表面对革兰氏阳性或阴性细菌具有抗生物污损或机械杀菌作用,这是由纳米尖峰图案的各向异性所诱导的电信号所导致的。