Mounayer Natalie, Shoshani Sivan, Afrimzon Elena, Iline-Vul Taly, Topaz Moris, Banin Ehud, Margel Shlomo
Institute of Nanotechnology and Advanced Materials, Department of Chemistry, Bar-Ilan University, Ramat-Gan 5290002, Israel.
Gels. 2025 Jan 2;11(1):31. doi: 10.3390/gels11010031.
Researchers have been investigating the physical and morphological properties of biodegradable polymer and copolymer films, blending them with other chemicals to solve challenges in medical, industrial, and eco-environmental fields. The present study introduces a novel, straightforward method for preparing biodegradable hydrogels based on polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) for medical applications. The resulting PVA/PVP-based hydrogel uniquely combines the water absorbency, biocompatibility, and biodegradability of the polymer composite. For hygiene products and medical uses, such as wound healing, hydrogen peroxide (HP) was encapsulated in the PVA/PVP hydrogels for controlled release application. Incorporating PVP into PVA significantly enhances the hydrogel water absorbency and improves the mechanical properties. However, to mitigate the disadvantage of high water absorbency which could result in undesired early dissolution, efforts were made to increase the water resistance and the mechanical characteristics of these hydrogels using freeze-thaw (F/T) cycles and chemical crosslinking PVA chains with trisodium trimetaphosphate (STMP). The resulting hydrogels serve as environmentally friendly bio-based polymer blends, broadening their applications in medical and industrial products. The structural and morphological properties of the hydrogel were characterized using Fourier transform infrared spectroscopy (FTIR), environmental scanning electron microscope analysis (E-SEM), and water-swelling tests. The HP controlled release rate was evaluated through kinetic release experiments using the ex vivo skin model. The antibacterial activity of the hydrogel films was examined on four medically relevant bacteria: , , , and , with an adapted disk diffusion assay. Using this assay, we also evaluated the antibacterial effect of the hydrogel films over the course of days, demonstrating the HP controlled release from these hydrogels. These findings support further in vivo investigation into controlled HP release systems for improved wound-healing outcomes.
研究人员一直在研究可生物降解聚合物和共聚物薄膜的物理和形态特性,并将它们与其他化学物质混合,以解决医学、工业和生态环境领域的挑战。本研究介绍了一种基于聚乙烯醇(PVA)和聚乙烯吡咯烷酮(PVP)制备用于医学应用的可生物降解水凝胶的新颖、简便方法。所得的基于PVA/PVP的水凝胶独特地结合了聚合物复合材料的吸水性、生物相容性和生物降解性。对于卫生产品和医学用途,如伤口愈合,将过氧化氢(HP)封装在PVA/PVP水凝胶中用于控释应用。将PVP掺入PVA中可显著提高水凝胶的吸水性并改善机械性能。然而,为了减轻高吸水性可能导致不期望的早期溶解这一缺点,人们努力通过冻融(F/T)循环以及用三聚偏磷酸钠(STMP)对PVA链进行化学交联来提高这些水凝胶的耐水性和机械特性。所得的水凝胶作为环境友好的生物基聚合物共混物,拓宽了它们在医学和工业产品中的应用。使用傅里叶变换红外光谱(FTIR)、环境扫描电子显微镜分析(E-SEM)和水溶胀试验对水凝胶的结构和形态特性进行了表征。通过使用离体皮肤模型的动力学释放实验评估了HP的控释速率。使用改良的纸片扩散法在四种医学相关细菌:、、和上检测了水凝胶薄膜的抗菌活性。使用该方法,我们还评估了水凝胶薄膜在数天内的抗菌效果,证明了HP从这些水凝胶中的控释。这些发现支持进一步对控释HP系统进行体内研究,以改善伤口愈合效果。