Li Sha, Zhu Xianggao, Xiao Haonan, Liu Weiwei, Zhang Yibao, Cai Jing, Li Tian, Lu Yanye
Institute of Medical Technology, Peking University Health Science Center, Beijing, 100191, China.
Key Laboratory of Carcinogenesis and Translational Research (Ministry of Education / Beijing), Department of Radiation Oncology, Peking University Cancer Hospital & Institute, Beijing Cancer Hospital & Institute, Beijing, 100142, China.
Radiat Oncol. 2025 Apr 11;20(1):51. doi: 10.1186/s13014-025-02600-3.
In radiotherapy, inadequate management of organ motion in liver cancer may lead to inadequate delineation accuracy, resulting in the underdosage of target tissues and overdosage of surrounding normal tissues. To investigate the clinical potential of multi-parametric 4D-MRI in the target delineation and dose accuracy for liver cancer radiotherapy.
Twenty patients receiving radiotherapy for liver cancer were enrolled. Each patient underwent contrast-enhanced planning CT (free-breathing), contrast-enhanced T1-weighted (free-breathing), T2-weighted (gated) 3D-MRI, and low-quality 4D-MRI using the time resolved imaging with interleaved stochastic trajectories volumetric interpolated breath-hold examination (TWIST-VIBE) sequence. A dual-supervised deformation estimation model was used to generate a 4D deformable vector field (4D-DVF) from 4D-MRI data, and the prior images were deformed using this 4D-DVF to generate multi-parametric 4D-MRI. Assisted by 3D-MRI and multi-parametric 4D-MRI, target contours were performed on the planning CT, resulting in the generation of Target_3D and Target_4D. Clinical plans, Plan_3D and Plan_4D, were designed based on these contours respectively. To explore the dosimetric variations resulting from different contours without re-optimization, Plan_3D was directly applied to Target_4D, and Plan_4D was applied to Target_3D to generate Plan_3D' and Plan_4D' respectively. Target volume, contours, dose-volume histograms (DVHs), conformity index (CI), homogeneity index (HI), maximum and mean dose to organ as risks (OARs) were compared and evaluated.
Mean volume differences between Target_3D and Target_4D were 2.76 cm (standard deviation [SD] 3.42 cm) in the caudate lobe, 181.54 cm (SD 68.50 cm) in the left hepatic lobe, and 26.08 cm (SD 20.52 cm) in the right hepatic lobe. Mean and SD of CI and HI is 1.02 ± 0.04 and 0.108 ± 0.02 in Plan_3D, 1.02 ± 0.01 and 0.107 ± 0.01 in Plan_4D. There were no statistically significant differences in OAR doses between Plan_3D and Plan_3D', between Plan_4D and Plan_4D'. However, a statistically significant difference in target dose was observed between Plan_3D and Plan_3D' (P = 1.47 × 10⁻⁷) and between Plan_4D and Plan_4D' (P = 0.013). Plan_3D' meets 100% of the prescription dose covering mean 77.89% (SD 10.13%) of the Targeted_4D volume, while Plan_4D' covered mean 94.17% (SD 3.12%) of the Targeted_3D volume.
3D image-guided target delineation may be more likely to underestimate target volume and compromise dose coverage, suggesting that using multi-parametric 4D-MRI can provide more precise target contours and enhance target dose coverage.
在放射治疗中,肝癌器官运动管理不当可能导致靶区勾画准确性不足,从而造成靶组织剂量不足以及周围正常组织剂量过量。为了研究多参数4D-MRI在肝癌放射治疗靶区勾画及剂量准确性方面的临床潜力。
招募20例接受肝癌放射治疗的患者。每位患者均接受了对比增强的计划CT(自由呼吸)、对比增强T1加权(自由呼吸)、T2加权(门控)3D-MRI以及使用时间分辨成像与交错随机轨迹容积插值屏气检查(TWIST-VIBE)序列的低质量4D-MRI检查。使用双监督变形估计模型从4D-MRI数据生成4D可变形矢量场(4D-DVF),并使用该4D-DVF对先前图像进行变形以生成多参数4D-MRI。在3D-MRI和多参数4D-MRI的辅助下,在计划CT上进行靶区轮廓勾画,从而生成Target_3D和Target_4D。分别基于这些轮廓设计临床计划Plan_3D和Plan_4D。为了探索不同轮廓导致的剂量学差异而不进行重新优化,将Plan_3D直接应用于Target_4D,将Plan_4D应用于Target_3D,分别生成Plan_3D'和Plan_4D'。比较并评估靶区体积、轮廓、剂量体积直方图(DVH)、适形指数(CI)、均匀性指数(HI)、危及器官(OAR)的最大剂量和平均剂量。
Target_3D和Target_4D之间的平均体积差异在尾状叶为2.76 cm(标准差[SD] 3.42 cm),在左肝叶为181.54 cm(SD 68.50 cm),在右肝叶为26.08 cm(SD 20.52 cm)。Plan_3D中CI和HI的平均值及标准差分别为1.02±0.04和0.108±0.02,Plan_4D中为1.02±0.01和0.107±0.01。Plan_3D与Plan_3D'之间、Plan_4D与Plan_4D'之间OAR剂量无统计学显著差异。然而,Plan_3D与Plan_3D'之间(P = 1.47×10⁻⁷)以及Plan_4D与Plan_4D'之间(P = 0.013)观察到靶区剂量有统计学显著差异。Plan_3D'达到100%的处方剂量,覆盖Targeted_4D体积的平均77.89%(SD 10.13%),而Plan_4D'覆盖Targeted_3D体积的平均94.17%(SD 3.12%)。
3D图像引导的靶区勾画可能更易低估靶区体积并损害剂量覆盖范围,这表明使用多参数4D-MRI可提供更精确的靶区轮廓并增强靶区剂量覆盖。