Application of Voronoi Tessellation to the Additive Manufacturing of Thermal Barriers of Irregular Porous Materials-Experimental Determination of Thermal Properties.

The issue of energy transfer is extremely important. In order to achieve the lowest possible energy consumption and the required thermal efficiency in energy-efficient buildings, it is necessary, among other things, to minimize the heat-transfer coefficient, which depends on the properties of the insulating material. Analyses of the relationship between the structure of a material and its thermal conductivity coefficient have shown that lower values of this coefficient can be achieved with a more complex structure that mimics natural forms. This paper presents a design method based on the Voronoi diagram to obtain a three-dimensional structure of a porous composite material. The method was found to be effective in producing structures with predefined and functionally graded porosity. The porous specimens were fabricated from a biodegradable soybean oil-based resin using mSLA additive technology. Analyses were performed to determine the thermal parameters of the anisotropic composites. Experimental results showed that both porosity and irregularity affect the thermal properties. The lowest thermal conductivity coefficients were obtained for a 100 mm-thick prototype composite with the following parameters: wall thickness = 0.2 mm, cell size = 4 mm, number of structural layers = 2, and degree of irregularity = 4. The lowest possible thermal conductivity of the insulation was 0.026 W/(m·K), and the highest possible thermal resistance was 3.92 (m·K)/W. The method presented in this study provides an effective solution for nature-inspired design and topological optimization of porous structures.