Bidelman Gavin M, Horn Claire McElwain
Department of Speech, Language and Hearing Sciences, Indiana University, Bloomington, IN 47408, USA.
Program in Neuroscience, Indiana University, Bloomington, IN 47405, USA.
Audiol Res. 2025 May 15;15(3):60. doi: 10.3390/audiolres15030060.
: Auditory steady-state responses (ASSRs) are sustained potentials used to assess the physiological integrity of the auditory pathway and objectively estimate hearing thresholds. ASSRs are typically analyzed using statistical procedures to remove the subjective bias of human operators. Knowing when to terminate signal averaging in ASSR testing is critical for making efficient clinical decisions and obtaining high-quality data in empirical research. Here, we report on stimulus-specific (frequency, level) properties and operating ranges of a novel ASSR detection metric based on mutual information (MI). : ASSRs were measured in = 10 normal-hearing listeners exposed to various stimuli varying in modulation rate (40, 80 Hz) and level (80-20 dB SPL). : MI-based classifiers applied to ASSR recordings showed that the accuracy of ASSR detection ranged from ~75 to 99% and was better for 40 compared to 80 Hz responses and for higher compared to lower stimulus levels. Receiver operating characteristics (ROCs) were used to establish normative ranges for MI for reliable ASSR detection across levels and rates (MI = 0.9-1.6). Relative to current statistics for ASSR identification (F-test), MI was a more efficient metric for determining the stopping criterion for signal averaging. : Our results confirm that MI can be applied across a broad range of ASSR stimuli and might offer improvements to conventional objective techniques for ASSR detection.
听觉稳态反应(ASSRs)是用于评估听觉通路生理完整性并客观估计听力阈值的持续电位。ASSRs通常使用统计程序进行分析,以消除人工操作的主观偏差。在ASSR测试中,知道何时终止信号平均对于做出有效的临床决策和在实证研究中获得高质量数据至关重要。在此,我们报告一种基于互信息(MI)的新型ASSR检测指标的刺激特异性(频率、强度)特性和工作范围。在10名听力正常的受试者中测量ASSRs,他们暴露于调制率(40、80Hz)和强度(80 - 20dB SPL)不同的各种刺激下。应用于ASSR记录的基于MI的分类器表明,ASSR检测的准确率在75%至99%之间,40Hz反应的准确率高于80Hz反应,较高刺激强度的准确率高于较低刺激强度。使用接受者操作特征(ROC)来建立MI的标准范围,以便在不同强度和率下可靠地检测ASSR(MI = 0.9 - 1.6)。相对于当前用于ASSR识别的统计方法(F检验),MI是确定信号平均停止标准的更有效指标。我们的结果证实,MI可应用于广泛的ASSR刺激,并且可能改进传统的ASSR检测客观技术。