Matinise N, Botha N, Fall A, Maaza M
UNESCO-UNISA Africa Chair in Nanosciences-Nanotechnology, College of Graduate Studies, University of South Africa, PO Box 392, Muckleneuk Ridge, Pretoria, South Africa.
Nanosciences African Network (NANOAFNET), iThemba LABS-National Research Foundation, 1 Old Faure road, Somerset West 7129, PO Box 722, Western Cape, South Africa.
Sci Rep. 2025 Jul 20;15(1):26333. doi: 10.1038/s41598-025-11418-8.
The development of Zn₃(VO₄)₂ nanomaterials was successfully achieved via a green chemistry method utilizing Moringa Oleifera extract. The photocatalytic performance of the synthesized nanomaterials was tested for the degradation of methylene blue (MB) under visible light irradiation. The optical properties, crystalline structure, and composition of the nanomaterials were analysed using photoluminescence (PL), X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), Fourier-transform infrared spectroscopy (FTIR), and high-resolution transmission electron microscopy (HRTEM). XRD and HRTEM data revealed that the nanomaterials prepared at 500 °C and 700 °C exhibited high crystallinity and were quasi-spherical with a range of particle sizes and irregular shapes. The electrochemical properties were evaluated using cyclic voltammetry (CV), linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS). The CV response showed broad redox peaks and peak separations indicative of pseudo-capacitive behaviour arising from faradaic reactions, which are pseudo-reversible. EIS results indicated that the electrochemical behaviour of the electrode material was influenced by both reaction kinetics and diffusion processes. Furthermore, the photocatalytic degradation of MB using Zn₃(VO₄)₂ nanomaterials was evaluated under visible light irradiation. The experiments considered various parameters, including MB concentration, catalyst loading, and pH. The results demonstrated an impressive degradation efficiency, reaching 87% removal of MB at pH 5.0 after 120 min of exposure to visible light. Kinetic analysis showed that the degradation followed a pseudo-first-order model (R² > 0.98), with high R² values and observed rate constants, highlighting the potential for optimizing catalyst use in environmental applications, particularly in the removal of organic pollutants like MB from wastewater.
通过利用辣木提取物的绿色化学方法成功实现了Zn₃(VO₄)₂纳米材料的制备。在可见光照射下,对合成的纳米材料的光催化性能进行了亚甲基蓝(MB)降解测试。使用光致发光(PL)、X射线衍射(XRD)、漫反射光谱(DRS)、傅里叶变换红外光谱(FTIR)和高分辨率透射电子显微镜(HRTEM)对纳米材料的光学性质、晶体结构和组成进行了分析。XRD和HRTEM数据表明,在500℃和700℃制备的纳米材料具有高结晶度,呈准球形,粒径范围和形状不规则。使用循环伏安法(CV)、线性扫描伏安法(LSV)和电化学阻抗谱(EIS)对电化学性质进行了评估。CV响应显示出宽的氧化还原峰和峰间距,表明由法拉第反应产生的赝电容行为,这些反应是准可逆的。EIS结果表明,电极材料的电化学行为受反应动力学和扩散过程的影响。此外,在可见光照射下评估了使用Zn₃(VO₄)₂纳米材料对MB的光催化降解。实验考虑了各种参数,包括MB浓度、催化剂负载量和pH值。结果显示出令人印象深刻的降解效率,在暴露于可见光120分钟后,在pH 5.0时MB的去除率达到87%。动力学分析表明,降解遵循准一级模型(R²>0.98),具有高R²值和观测速率常数,突出了在环境应用中优化催化剂使用的潜力,特别是在从废水中去除像MB这样的有机污染物方面。