Zhang Jie, Yang Qiusheng, Xu Meixia, Tan Xinqiang, Peng Xucong, Yang Ziqing, Li Kang, Yang Jia, Chen Jie, Xun Xuan, Xiao Saijun, Zhou Lingjie, Liu Minzhuo, Zeng Zhihong
College of Biological and Chemical Engineering, Changsha University, Changsha 410022, China.
Yantai Key Laboratory of Nanomedicine & Advanced Preparations, Yantai Institute of Materia Medica, Yantai 264000, China.
Pharmaceuticals (Basel). 2025 Jul 3;18(7):1000. doi: 10.3390/ph18071000.
Surfactants can be added into polymer-amorphous drug systems to further enhance solubility. However, this may cause amorphous drugs to become physically unstable, and the inherent mechanism at play here is not fully understood. We explored the effects of poloxamer, a poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) (PEO-PPO-PEO) triblock copolymer surfactant, and its segments on the nucleation and growth kinetics of amorphous nitrendipine (NTP) from the melt through polarized light microscopy. The effects of poloxamer and structural analogs on the melting point and glass transition temperature were also investigated using differential scanning calorimetry. The poloxamer and its structural analogs enhanced nucleation and growth kinetics in supercooled liquid. Poloxamer and its structural analogs exhibited similar effects on the nucleation and growth kinetics of amorphous NTP, suggesting minimal dependence on structural variation. The overall crystallization rate of the NTP increased when increasing the poloxamer content and ultimately reached a maximum value; after that, the crystallization rates of NTP decreased when increasing the poloxamer content. Poloxamer and its structural analogs achieve similar effects on crystallization due to their comparable plasticizing effects. The nucleation and growth rates show different trends as a function of the poloxamer content. This effect is a result of both kinetic and thermodynamic factors. This study is relevant to understanding the impacts of the surfactant on the physical instability of amorphous drugs.
表面活性剂可添加到聚合物-无定形药物体系中以进一步提高溶解度。然而,这可能会导致无定形药物在物理上变得不稳定,而其中起作用的内在机制尚未完全了解。我们通过偏光显微镜研究了泊洛沙姆(一种聚(环氧乙烷)-聚(环氧丙烷)-聚(环氧乙烷)(PEO-PPO-PEO)三嵌段共聚物表面活性剂)及其链段对无定形尼群地平(NTP)从熔体中成核和生长动力学的影响。还使用差示扫描量热法研究了泊洛沙姆及其结构类似物对熔点和玻璃化转变温度的影响。泊洛沙姆及其结构类似物增强了过冷液体中的成核和生长动力学。泊洛沙姆及其结构类似物对无定形NTP的成核和生长动力学表现出相似的影响,表明对结构变化的依赖性最小。当增加泊洛沙姆含量时,NTP的总体结晶速率增加并最终达到最大值;此后,当增加泊洛沙姆含量时,NTP的结晶速率降低。泊洛沙姆及其结构类似物由于其相当的增塑作用而对结晶产生相似的影响。成核速率和生长速率随泊洛沙姆含量的变化呈现不同趋势。这种效应是动力学和热力学因素共同作用的结果。本研究有助于理解表面活性剂对无定形药物物理不稳定性的影响。