Kearney R E, Hunter I W
J Biomech. 1982;15(10):753-6. doi: 10.1016/0021-9290(82)90090-2.
The left foot of five normal human subjects was rotated in a fixed stochastic pattern about a constant ankle angle and the torques opposing these rotations were measured. The dynamic stiffness transfer functions relating ankle angular position to ankle torque were calculated. Stiffness gain was flat at low frequencies, had a resonant valley at intermediate frequencies, and rose to about 40 dB/decade at high frequencies. The mean ankle torque was held constant and the peak-to-peak amplitude of the displacement was varied. The low frequency gain and resonant frequency decreased progressively with increases in the peak-to-peak amplitude of the displacement. The dynamic stiffness was well described by a linear, second-order transfer function having inertial, viscous and elastic terms. Estimates of the inertial parameter were independent of the displacement amplitude but the viscous and elastic parameters decreased with increases in displacement amplitude.
五名正常人类受试者的左脚以固定的随机模式围绕恒定的踝关节角度旋转,并测量了抵抗这些旋转的扭矩。计算了将踝关节角位置与踝关节扭矩相关联的动态刚度传递函数。刚度增益在低频时平坦,在中频时有一个共振谷,并在高频时上升到约40dB/十倍频程。平均踝关节扭矩保持恒定,位移的峰峰值幅度变化。随着位移峰峰值幅度的增加,低频增益和共振频率逐渐降低。动态刚度可以用一个具有惯性、粘性和弹性项的线性二阶传递函数很好地描述。惯性参数的估计与位移幅度无关,但粘性和弹性参数随着位移幅度的增加而减小。