Ishihara K, Oshida H, Endo Y, Watanabe A, Ueda T, Nakabayashi N
Institute for Medical and Dental Engineering, Tokyo Medical and Dental University, Japan.
J Biomed Mater Res. 1993 Oct;27(10):1309-14. doi: 10.1002/jbm.820271011.
Polymers with phospholipid polar groups, 2-methacryloyloxyethyl phosphorylcholine (MPC) polymers, have excellent nonthrombogenic properties. The effects of adsorption of phospholipids on platelet adhesion and activation on the MPC copolymer with n-butyl methacrylate (BMA) were investigated with particular attention to the structure of the phospholipids adsorbed onto the polymer surface. The electrical nature of the phospholipids adsorbed on the polymer surface affected the thrombogenicity of the polymer. On the MPC polymer surface treated with an aqueous liposomal solution of acidic phospholipids, phosphatidylserine, platelet adhesion and activation occurred to a greater extent when compared to a poly(MPC-co-BMA) surface. However, on the MPC polymer surface treated with electrically neutral phosphatidylcholines, reduced thrombogenicity could be observed. Therefore, the adsorption of the phosphatidylcholines was an important factor in reducing the thrombogenicity on the polymers. Moreover, by comparison of the poly(MPC-co-BMA) to a poly(BMA), platelet adhesion and activation on these polymer surfaces depended on the adsorption state of the phosphatidylcholines. The amount of phosphatidylcholine adsorbed on the poly(MPC-co-BMA) increased with an increase in the MPC mole fraction of the copolymer. This indicates that the MPC moieties have affinity for the phosphatidylcholines. We conclude that the poly(MPC-co-BMA) can adsorb large amounts of phosphatidylcholines and that these phospholipids organize themselves. The organized adsorption layer of the phosphatidylcholines on the surface, which construct biomembrane-like surfaces, can reduce platelet adhesion and activation effectively.
带有磷脂极性基团的聚合物,即2-甲基丙烯酰氧基乙基磷酰胆碱(MPC)聚合物,具有优异的抗血栓形成特性。研究了磷脂吸附对甲基丙烯酸正丁酯(BMA)与MPC共聚物上血小板黏附及活化的影响,特别关注吸附在聚合物表面的磷脂结构。吸附在聚合物表面的磷脂的电学性质影响了聚合物的血栓形成性。在用酸性磷脂(磷脂酰丝氨酸)的脂质体水溶液处理过的MPC聚合物表面,与聚(MPC-co-BMA)表面相比,血小板黏附和活化的程度更大。然而,在用电中性的磷脂酰胆碱处理过的MPC聚合物表面,可以观察到血栓形成性降低。因此,磷脂酰胆碱的吸附是降低聚合物血栓形成性的一个重要因素。此外,通过将聚(MPC-co-BMA)与聚(BMA)进行比较,这些聚合物表面上的血小板黏附和活化取决于磷脂酰胆碱的吸附状态。吸附在聚(MPC-co-BMA)上的磷脂酰胆碱的量随着共聚物中MPC摩尔分数的增加而增加。这表明MPC部分对磷脂酰胆碱具有亲和力。我们得出结论,聚(MPC-co-BMA)可以吸附大量的磷脂酰胆碱,并且这些磷脂会自行组织。表面上磷脂酰胆碱的有序吸附层构建了类似生物膜的表面,能够有效减少血小板的黏附和活化。