Altankov G, Grinnell F, Groth T
Institute of Biophysics, Bulgarian Academy of Sciences, Sofia, Bulgaria.
J Biomed Mater Res. 1996 Mar;30(3):385-91. doi: 10.1002/(SICI)1097-4636(199603)30:3<385::AID-JBM13>3.0.CO;2-J.
The ability of human fibroblasts to remove and reorganize fibronectin (FN) bound on material surfaces was studied as a novel feature of material surface biocompatibility. Other traditional parameters of biocompatibility analyzed included cell spreading, clustering of fibronectin receptors into focal adhesions, development of stress fibers, and cell growth. Five different materials with surface wettability ranging from hydrophilic (underwater contact angle 25 degrees) to hydrophobic (underwater contact angle 111 degrees) were used, i.e., clean glass (GLASS), aminopropylsilane (APS), octadecylsilane (ODS), polylactate (PL), and silicone (SI). When cells were cultured on these materials in serum-containing medium, formation of FN receptor-rich focal adhesions and actin stress fibers were more evident on the hydrophilic surfaces (GLASS and APS) compared to the hydrophobic ones (PL, ODS, and SI). Cell growth showed a similar pattern, that is, increased cell proliferation with increasing material surface wettability. Preadsorption of FN on the material surfaces increased subsequent cell spreading and cytoskeletal reorganization on hydrophobic surfaces except SI. Removal and reorganization of FN from the material surfaces into extracellular matrixlike structures occurred on GLASS but not on less wettable surfaces, suggesting that this removal/reorganization process may be more sensitive to changes in surface wettability than other parameters of biocompatibility.
作为材料表面生物相容性的一个新特性,研究了人类成纤维细胞去除和重组结合在材料表面的纤连蛋白(FN)的能力。分析的其他传统生物相容性参数包括细胞铺展、纤连蛋白受体聚集成粘着斑、应力纤维的形成以及细胞生长。使用了五种不同的材料,其表面润湿性从亲水性(水下接触角25度)到疏水性(水下接触角111度)不等,即清洁玻璃(GLASS)、氨丙基硅烷(APS)、十八烷基硅烷(ODS)、聚乳酸(PL)和硅酮(SI)。当细胞在含血清培养基中在这些材料上培养时,与疏水性表面(PL、ODS和SI)相比,富含FN受体的粘着斑和肌动蛋白应力纤维在亲水性表面(GLASS和APS)上形成得更明显。细胞生长呈现出类似的模式,即随着材料表面润湿性的增加,细胞增殖增加。除SI外,在材料表面预吸附FN会增加后续细胞在疏水表面上的铺展和细胞骨架重组。在GLASS上发生了FN从材料表面去除并重组为细胞外基质样结构的过程,但在润湿性较低的表面上未发生,这表明这种去除/重组过程可能比生物相容性的其他参数对表面润湿性的变化更敏感。