Suppr超能文献

椎动脉孔的位置及其与后外侧块螺钉固定的关系。

The location of the vertebral artery foramen and its relation to posterior lateral mass screw fixation.

作者信息

Ebraheim N A, Xu R, Yeasting R A

机构信息

Department of Orthopaedic Surgery, Medical College of Ohio, Toledo, USA.

出版信息

Spine (Phila Pa 1976). 1996 Jun 1;21(11):1291-5. doi: 10.1097/00007632-199606010-00002.

Abstract

STUDY DESIGN

This study evaluated the anatomic relationship between the vertebral artery foramen and the posterior midpoint of the cervical lateral mass using cervical spine specimens.

OBJECTIVES

To determine quantitatively the location of the vertebral artery foramens from C3 to C6 and their relationship to the posterior midpoints of the lateral masses.

SUMMARY OF BACKGROUND DATA

Anatomic studies of the cervical nerve root and facet relative to lateral mass screw placement have been addressed. It is necessary to know the correct location of the vertebral artery foramen during lateral mass screw placement to minimize the risk of injury to the vertebral artery.

METHODS

Forty-three cervical spines from C3 to C6 were directly evaluated for this study. Anatomic evaluation included the dimension of the vertebral artery foramen and its projection on the posterior aspect of the lateral mass. The vertical distance from the posterior midpoint of the lateral mass to the posterior border of the vertebral artery foramen, and the angle between the parasagittal plane and the line connecting the posterior midpoint of the lateral mass with the lateral limit of the vertebral artery foramen, were also measured.

RESULTS

The vertical distances from the posterior midpoint of the lateral mass to the vertebral artery foramens at C3-C6 averaged from 9.3 to 12.2 mm for male and female specimens. The average angles medial to the sagittal plane, between the parasagittal plane and the line connecting the posterior midpoint of the lateral mass with the lateral limit of the vertebral artery foramen, from C3 to C5, were found to range from 6.0 degrees to 6.3 degrees for male specimens and from 5.3 degrees to 5.5 degrees for female specimens. At C6, the average angles lateral to the sagittal plane, between the parasagittal plane and the line connecting the posterior midpoint of the lateral mass with the lateral limit of the vertebral artery foramen, were 6.4 degrees for male specimens and 5.4 degrees for female specimens.

CONCLUSIONS

The present study indicated that there is no risk of damaging the vertebral artery if a screw is directed perpendicular to the posterior aspect of the lateral mass at C3-C5 and 10 degrees lateral to the sagittal plane at C6 starting at the midpoint of the lateral mass.

摘要

研究设计

本研究使用颈椎标本评估椎动脉孔与颈椎侧块后中点之间的解剖关系。

目的

定量确定C3至C6节段椎动脉孔的位置及其与侧块后中点的关系。

背景数据总结

已对颈椎神经根和小关节相对于侧块螺钉置入的解剖学研究进行了探讨。在侧块螺钉置入过程中,有必要了解椎动脉孔的正确位置,以尽量减少椎动脉损伤的风险。

方法

本研究直接评估了43个C3至C6节段的颈椎。解剖学评估包括椎动脉孔的尺寸及其在侧块后侧的投影。还测量了侧块后中点到椎动脉孔后缘的垂直距离,以及矢状旁平面与连接侧块后中点和椎动脉孔外侧缘的线之间的夹角。

结果

男性和女性标本中,侧块后中点到C3 - C6节段椎动脉孔的垂直距离平均为9.3至12.2毫米。发现男性标本从C3到C5,矢状旁平面与连接侧块后中点和椎动脉孔外侧缘的线之间,在矢状平面内侧的平均角度为6.0度至6.3度,女性标本为5.3度至5.5度。在C6节段,男性标本矢状旁平面与连接侧块后中点和椎动脉孔外侧缘的线之间,在矢状平面外侧的平均角度为6.4度,女性标本为5.4度。

结论

本研究表明,如果在C3 - C5节段将螺钉垂直于侧块后侧置入,在C6节段从侧块中点开始向矢状平面外侧10度置入,则不存在损伤椎动脉的风险。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验