Suppr超能文献

用于全器官切片的喉部塑化

Plastination of the larynx for whole-organ sectioning.

作者信息

Sittel C, Eckel H E, Sprinzl G M, Stennert E

机构信息

Department of Otorhinolaryngology/Head and Neck Surgery, University of Cologne, Germany.

出版信息

Eur Arch Otorhinolaryngol. 1997;254 Suppl 1:S93-6. doi: 10.1007/BF02439734.

Abstract

Whole-organ sectioning is an important technique for the assessment of laryngeal pathology. Since currently established methods require prior decalcification which causes morphological changes, the critical border area between cartilage and surrounding soft tissue cannot be investigated in the same specimen and morphometric studies are not possible. Plastination is a laboratory technique that has previously demonstrated its capacity to overcome these shortcomings. In so doing water and lipids are replaced by curable polymer within the laryngeal cells making decalcification unnecessary. In the present study, more than 50 human larynges were processed using block plastination (BP) and sheet plastination (SP). For BP the complete organ was plastinated as a whole and then cut into thin serial sections. For SP the fresh organ was sliced first and plastinated in a second step. Findings demonstrated that SP allowed for the production of whole-organ sections within a period of 1 week only. Section thicknesses were as thin as 15 mm using a diamond wire saw and an ultramilling device. Sectioning was possible in both coronary and horizontal planes. Following BP, specimens were cut in an industrial cutting machine to thicknesses of about 0.6 mm. Shrinkage of tissue was less than 10% for both methods. In all, SP was technically superior to routine paraffin histology, although cutting equipment is very expensive and delicate in handling. At present the technique of BP is the method of choice for macromorphometrical investigations on serial sections of the human larynx.

摘要

全器官切片是评估喉部病理学的一项重要技术。由于目前已确立的方法需要预先脱钙,而这会导致形态学改变,因此无法在同一样本中研究软骨与周围软组织之间的关键边界区域,形态计量学研究也无法进行。塑化是一种实验室技术,此前已证明其有能力克服这些缺点。通过这种方法,喉部细胞内的水和脂质被可固化聚合物取代,无需进行脱钙。在本研究中,使用块状塑化(BP)和薄片塑化(SP)对50多个人类喉部进行了处理。对于BP,将整个器官整体塑化,然后切成连续的薄片。对于SP,先将新鲜器官切片,第二步进行塑化。结果表明,SP仅需1周时间就能制作出全器官切片。使用金刚石线锯和超薄铣削设备,切片厚度可达15微米。在冠状面和水平面都可以进行切片。BP处理后的标本在工业切割机上切成约0.6毫米的厚度。两种方法的组织收缩率均小于10%。总体而言,尽管切割设备非常昂贵且操作精细,但SP在技术上优于常规石蜡组织学。目前,BP技术是对人类喉部连续切片进行大体形态计量学研究的首选方法。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验