van Rhoon G C, Rietveld P J, van der Zee J
University Hospital Rotterdam, Daniel den Hoed Cancer Center, Department of Radiation Oncology, Rotterdam, The Netherlands.
Int J Hyperthermia. 1998 Jan-Feb;14(1):13-27. doi: 10.3109/02656739809018211.
The effective field size (EFS, SAR > or = 50% of the maximum SAR at 1 cm depth) of a conventional 433 MHz water filled waveguide applicator (32 cm2, aperture area 100 cm2) has been increased by: (1) replacement of the two diverging brass side walls which are parallel to the direction of the electric field by Lucite walls; and (2) Placement of a heterogeneous permittivity in the centre of the aperture. SAR distributions were measured at several depths in layered fat-muscle phantoms. With Lucite side walls the SAR distribution becomes wider in the H-plane of the aperture, resulting in a circular SAR distribution. In this situation the EFS is 67 cm2. Additional insertion of a PVC cone with a top angle of 15 degrees at the centre of the aperture increases the EFS to 91 +/- 6 cm2 for a waterbolus of 18 x 18 x 1 cm3. The experiments also demonstrated that the resulting EFS is affected by the waterbolus size and shape. Calorimetric measurements showed that the efficiency of the improved applicator is comparable to the efficiency of the conventional water filled waveguide applicator, 50 and 56% respectively. The modifications reported provide a simple and inexpensive means to increase the EFS and can be easily implemented in water filled waveguide applicators.
