Suppr超能文献

组织对用于修复腹壁缺损的聚丙烯网片的反应。

Tissue response to polypropylene meshes used in the repair of abdominal wall defects.

作者信息

Bellón J M, Contreras L A, Buján J, Palomares D, Carrera-San Martín A

机构信息

Department of Morphological Sciences and Surgery, Faculty of Medicine, University of Alcalá de Henares, Carretera N-II, Madrid, Spain.

出版信息

Biomaterials. 1998 Apr-May;19(7-9):669-75. doi: 10.1016/s0142-9612(97)00162-2.

Abstract

The degree of integration of biomaterials used in the repair of abdominal wall defects seems to depend upon the structure of the prosthesis. Several polypropylene (PP) prostheses are currently available which differ in the number of PP filaments, the type of weave and the porosity. The aim of this study was to evaluate the integration, adhesion formation and resistance to traction of three types of PP prostheses (Marlex, Trelex and Prolene) used in the partial or total repair of abdominal wall defects. Abdominal wall defects (7 x 5 cm) were created in 54 New Zealand rabbits involving all the tissue layers (total substitutions (TS); n = 27) or all layers excluding the parietal peritoneum (partial substitutions (PS); n = 27). The defects were repaired with PP monofilament prostheses of different weave (1 mm porosity) (Marlex, n = 18; Trelex, n = 18) or bifilament (2 mm porosity) (Prolene; n = 18). They were placed in contact on one side with subcutaneous tissue and on the other with abdominal viscera or parietal peritoneum. Animals were killed at 30, 60 and 90 days and samples of prosthesis and scar tissue processed for light and scanning microscopy. The adhesion formation with viscera was evaluated. Resistance to traction was measured with a tensiometer using strips including the prosthesis and anchorage tissue. Adhesions were detected in all the TS and in four PS. Microscopic analysis revealed total integration of the TS samples by fibrous and disorganized tissue. Prostheses used for PS were integrated by white adipose tissue with the exception of the areas around the mesh nodes and anchorage zones. The foreign body reaction could be seen as a moderate accumulation of white blood cells. Tensiometric analysis showed an increase in resistance to traction with time (P < 0.001) in each type of prosthesis, but no differences were detected (P > 0.001) between them. We concluded that: (a) the formation of adhesions was almost inhibited when the parietal peritoneum was left intact; (b) in both TS and PS, polypropylene prostheses integrated completely although the composition of the scar tissue was seem to differ; and (c) resistance to traction was similar in both TS and PS.

摘要

用于修复腹壁缺损的生物材料的整合程度似乎取决于假体的结构。目前有几种聚丙烯(PP)假体,它们在PP细丝数量、编织类型和孔隙率方面存在差异。本研究的目的是评估用于腹壁缺损部分或全部修复的三种PP假体(Marlex、Trelex和Prolene)的整合情况、粘连形成情况以及抗拉伸能力。在54只新西兰兔身上制造腹壁缺损(7×5厘米),涉及所有组织层(全层置换(TS);n = 27)或除壁腹膜外的所有层(部分置换(PS);n = 27)。缺损用不同编织方式(孔隙率1毫米)的PP单丝假体(Marlex,n = 18;Trelex,n = 18)或双丝(孔隙率2毫米)假体(Prolene;n = 18)进行修复。假体一侧与皮下组织接触,另一侧与腹腔脏器或壁腹膜接触。在30、60和90天时处死动物,对假体和瘢痕组织样本进行光镜和扫描显微镜检查。评估与脏器的粘连形成情况。使用拉力计测量包括假体和固定组织的条带的抗拉伸能力。在所有TS组和4个PS组中均检测到粘连。显微镜分析显示TS样本被纤维状和杂乱组织完全整合。用于PS的假体除网孔节点和固定区域周围外,被白色脂肪组织整合。异物反应可表现为白细胞的中度积聚。拉力分析显示,每种假体的抗拉伸能力随时间增加(P < 0.001),但它们之间未检测到差异(P > 0.001)。我们得出结论:(a)当壁腹膜保持完整时,粘连形成几乎受到抑制;(b)在TS组和PS组中,聚丙烯假体均完全整合,尽管瘢痕组织的组成似乎不同;(c)TS组和PS组的抗拉伸能力相似。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验