Wild P, Perdrix A, Romazini S, Moulin J J, Pellet F
Institut National de Recherche et de Sécurité, Service Epidémiologie, BP 27, 54501 Vandoeuvre Cedex, France.
Occup Environ Med. 2000 Aug;57(8):568-73. doi: 10.1136/oem.57.8.568.
To study the mortality from lung cancer from exposures to hard metal dust at an industrial site producing hard metals--pseudoalloys of cobalt and tungsten carbide--and other metallurgical products many of which contain cobalt.
A historical cohort was set up of all subjects who had worked for at least 3 months on the site since its opening date in the late 1940s. A full job history could be obtained for 95% of the subjects. The cohort was followed up from January 1968 to December 1992. The exposure was assessed by an industry specific job exposure matrix (JEM) characterising exposure to hard metal dust from 1 to 9 and other possibly carcinogenic exposures as present or absent. Smoking information was obtained by interview of former workers. Standard lifetable methods and Poisson regression were used for the statistical analysis of the data.
Mortality from all causes was close to the expected (standardised mortality ratio (SMR) 1.02, 399 deaths) whereas mortality from lung cancer was significantly increased among men (SMR 1.70; 46 deaths, 95% confidence interval (95% CI) 1.24 to 2.26). By workshop, lung cancer mortality was significantly higher than expected in hard metal production before sintering (SMR 2.42; nine deaths; 95%CI 1.10 to 4.59) and among maintenance workers (SMR 2.56; 11 deaths; 95%CI 1.28 to 4.59), whereas after sintering the SMR was lower (SMR 1.28; five deaths; 95%CI 0.41 to 2.98). The SMR for all exposures to hard metal dust at a level >1 in the JEM was in significant excess (SMR 2.02; 26 deaths; 95%CI 1.32 to 2.96). The risks increased with exposure scores, duration of exposure, and cumulative dose reaching significance for duration of exposure to hard metal dust before sintering, after adjustment for smoking and known or suspected carcinogens.
Excess mortality from lung cancer was found among hard metal production workers which cannot be attributed to smoking alone. This excess occurred mostly in subjects exposed to unsintered hard metal dust.
研究在一个生产硬质合金(钴和碳化钨的假合金)以及其他许多含有钴的冶金产品的工业场所,因接触硬质金属粉尘而导致的肺癌死亡率。
建立一个历史队列,纳入自20世纪40年代末该场所开业以来至少工作3个月的所有受试者。95%的受试者可获取完整的工作史。该队列从1968年1月至1992年12月进行随访。通过特定行业的工作暴露矩阵(JEM)评估暴露情况,该矩阵将接触硬质金属粉尘的程度分为1至9级,并确定是否存在其他可能致癌的暴露因素。通过对 former workers 的访谈获取吸烟信息。采用标准寿命表法和泊松回归对数据进行统计分析。
全因死亡率接近预期(标准化死亡比(SMR)为1.02,399例死亡),而男性肺癌死亡率显著升高(SMR为1.70;46例死亡,95%置信区间(95%CI)为1.24至2.26)。按车间划分,在烧结前的硬质金属生产车间(SMR为2.42;9例死亡;95%CI为1.10至4.59)以及维修工人中(SMR为2.56;11例死亡;95%CI为1.28至4.59),肺癌死亡率显著高于预期,而烧结后的SMR较低(SMR为1.28;5例死亡;95%CI为0.41至2.98)。JEM中接触硬质金属粉尘水平>1的所有暴露情况的SMR显著超标(SMR为2.02;26例死亡;95%CI为1.32至2.96)。在调整吸烟以及已知或疑似致癌物因素后,风险随着暴露分数、暴露持续时间和累积剂量的增加而增加,其中烧结前接触硬质金属粉尘的持续时间达到显著水平。
在硬质金属生产工人中发现肺癌死亡率过高,这不能仅归因于吸烟。这种过高的死亡率主要发生在接触未烧结硬质金属粉尘的受试者中。