Korenkov M, Goh P, Yücel N, Troidl H
Surgical Clinic, 2nd Department of Surgery, University of Cologne, Germany.
Obes Surg. 2003 Jun;13(3):360-3. doi: 10.1381/096089203765887660.
Laparoscopic gastric bypass (LGBP) is a well-established procedure for the surgical management of morbid obesity. Most surgeons create the gastroenteral anastomosis by using the circular EEA stapler. We describe an alternative laparoscopic anastomotic technique using the EndoGIA linear stapling device.
The stomach was proximally transected with a linear stapler (45 mm, Endo-GIA) to create a 15 to 20 ml pouch. Next, an antecolic Roux-en-Y gastroenterostomy was performed, using the 45 mm Endo-GIA. The proximal loop of the intestine was then separated from the anastomotic site by the Endo-GIA. Finally, the Endo-GIA was used for the intraabdominal creation of a side-to-side enteroenterostomy.
Between June and August 2001, 5 patients with mean BMI 56.7 kg/m(2)+/-7.3 underwent LGBP. All patients were seen 6 months post-surgery. Operating time was 7.5 and 6.5 hours for the first 2 operations, but was under 4.5 h for the next 3 cases. 1 patient suffered from perioperative hypoxia leading to long-term artificial respiration. 6 weeks after surgery, 1 patient developed obstruction due to torsion of the enteroenterostomy and required open revision. The 3 remaining patients made an uneventful recovery. All patients lost considerable weight (mean 36.5 kg; [range 32 to 45] after 6 months). No stenosis or anastomotic leakage was noted.
A linear stapled anastomosis is an alternative to the use of the circular stapler.
腹腔镜胃旁路术(LGBP)是治疗病态肥胖的一种成熟手术方法。大多数外科医生使用圆形EEA吻合器进行胃肠吻合。我们描述一种使用EndoGIA线性吻合器的替代腹腔镜吻合技术。
用线性吻合器(45mm,Endo-GIA)在胃近端横断,形成一个15至20ml的胃囊。接下来,使用45mm Endo-GIA进行结肠前Roux-en-Y胃肠吻合术。然后用Endo-GIA将肠近端环与吻合部位分离。最后,使用Endo-GIA在腹腔内进行侧侧肠吻合术。
2001年6月至8月期间,5例平均BMI为56.7kg/m²±7.3的患者接受了LGBP手术。所有患者在术后6个月接受复查。前2例手术的手术时间分别为7.5小时和6.5小时,但后3例手术时间均在4.5小时以内。1例患者围手术期出现低氧血症,导致长期人工呼吸。术后6周,1例患者因肠吻合口扭转出现梗阻,需要进行开放修复。其余3例患者恢复顺利。所有患者体重均显著减轻(6个月后平均减轻36.5kg;范围为32至45kg)。未发现狭窄或吻合口漏。
线性吻合术可替代圆形吻合器的使用。