[The effect of various sterilization procedures on the osteoinductive properties of demineralized bone matrix].

To minimize potential infection following the transplantation of allogeneic bone, extremely rigorous selection of donors and careful processing and storage of samples are required. Other major problems related to allogeneic transplants, such as reduced osteogenic properties and immunological reactions, led to the development of demineralized bone matrix (DBM). This osteoinductive bone extract is largely free of antigens and is easy to produce. However, to eliminate the potential risk of infection, DBM should be sterilized prior to implantation. The purpose of this study was to investigate the influence of different sterilization techniques on the osteoinductive properties of DBM. A series of 76 cortical defects (drill holes) 0.6 cm in diameter in the tibiae of 11 Merino sheep were filled with DBM in addition to autogeneic and allogeneic cancellous bone. Prior to implantation DBM was sterilized by autoclaving, gamma irradiation, or application of ethylene oxide or ethyl alcohol. A further 12 drill holes were left empty as controls. The formation of new bone was examined 3 and 6 weeks postoperatively, using histological, fluorescent-optical and microradiographical techniques. The amount of newly formed bone was also quantified. Apart from autoclaved DBM all matrix grafts showed excellent new bone formation following sterilization, by far exceeding the formation with allogeneic cancellous bone.