Seaton A, Cherrie J, Dennekamp M, Donaldson K, Hurley J F, Tran C L
Institute of Occupational Medicine, Edinburgh, UK.
Occup Environ Med. 2005 Jun;62(6):355-62. doi: 10.1136/oem.2004.014332.
To assess hazards associated with exposure to dust in the London Underground railway and to provide an informed opinion on the risks to workers and the travelling public of exposure to tunnel dust.
Concentrations of dust, as mass (PM2.5) and particle number, were measured at different underground stations and in train cabs; its size and composition were analysed; likely maximal exposures of staff and passengers were estimated; and in vitro toxicological testing of sample dusts in comparison with other dusts was performed.
Concentrations on station platforms were 270-480 microg/m3 PM2.5 and 14,000-29,000 particles/cm3. Cab concentrations over a shift averaged 130-200 microg/m3 and 17,000-23,000 particles/cm3. The dust comprised by mass approximately 67% iron oxide, 1-2% quartz, and traces of other metals, the residue being volatile matter. The finest particles are drawn underground from the surface while the coarser dust is generated by interaction of brakes, wheels, and rails. Taking account of durations of exposure, drivers and station staff would have maximum exposures of about 200 microg/m3 over eight hours; the occupational exposure standard for welding fume, as iron oxide, is 5 mg/m3 over an eight hour shift. Toxicology showed the dust to have cytotoxic and inflammatory potential at high doses, consistent with its composition largely of iron oxide.
It is unjustifiable to compare PM2.5 exposure underground with that on the surface, since the adverse effects of iron oxide and combustion generated particles differ. Concentrations of ultrafine particles are lower and of coarser (PM2.5) particles higher underground than on the surface. The concentrations underground are well below allowable workplace concentrations for iron oxide and unlikely to represent a significant cumulative risk to the health of workers or commuters.
评估伦敦地铁接触粉尘相关的危害,并就接触隧道粉尘对工人和乘客的风险提供有依据的意见。
在不同地铁站和列车驾驶室内测量粉尘的质量浓度(PM2.5)和颗粒数浓度;分析其大小和成分;估计工作人员和乘客可能的最大接触量;并与其他粉尘相比,对样本粉尘进行体外毒理学测试。
站台的粉尘浓度为PM2.5 270 - 480微克/立方米和14,000 - 29,000颗粒/立方厘米。一个班次中驾驶室内的粉尘浓度平均为130 - 200微克/立方米和17,000 - 23,000颗粒/立方厘米。粉尘按质量计约67%为氧化铁,1 - 2%为石英,还有微量其他金属,其余为挥发性物质。最细的颗粒从地表被吸入地下,而较粗的粉尘由刹车、车轮和轨道相互作用产生。考虑到接触时长,司机和站台工作人员在八小时内的最大接触量约为200微克/立方米;作为氧化铁的焊接烟尘职业接触标准是八小时班次内5毫克/立方米。毒理学表明,高剂量时该粉尘具有细胞毒性和炎症潜力,这与其主要由氧化铁组成的成分相符。
将地下PM2.5接触量与地表接触量进行比较是不合理的,因为氧化铁和燃烧产生的颗粒的不利影响不同。地下超细颗粒浓度较低,较粗(PM2.5)颗粒浓度高于地表。地下浓度远低于氧化铁的允许工作场所浓度,不太可能对工人或通勤者的健康构成显著的累积风险。