Derivation and use of sediment quality guidelines for ecological risk assessment of metals and radionuclides released to the environment from uranium mining and milling activities in Canada.

The Screening Level Concentration (SLC) approach was used to derive Lowest Effect Level (LEL) and Severe Effect Level (SEL) concentrations for nine metals (As, Cr, Cu, Pb, Mo, Ni, Se, U and V) and three radionuclides (226Ra, 210Pb, and 210Po) released to the aquatic environment during the mining and milling of uranium ore. This method was chosen because it allowed for the best use of the considerable historical and current data collected for diverse purposes in the uranium mining and milling regions of Canada (20,606 data points used in the analysis). Except for Cr, all the LELs derived in this study using the weighted method and published sediment quality guidelines (SQGs) were highly reliable (> 85%) in predicting sites unimpacted by uranium mining/milling defined as sites where reductions in the abundance and species richness of benthic invertebrate communities were < 20%. The derived SEL values and corresponding published SQGs (with the exception of Ni) were not reliable predictors (< or = 60%) of severe impacts on benthic invertebrate communities when severe impacts are defined as a reduction in abundance and species richness > or = 40%. Most of the severely impacted sites had sediment contaminant concentrations well below the SEL values. It is concluded that LELs derived using the weighted method can reliably be used in ecological risk assessments as concentrations below which adverse effects on benthic invertebrate communities are not expected. In contrast, it is recommended that SELs not be used in assessments of uranium mining/milling activities as concentrations above which adverse effects are anticipated.