Sacu Stefan, Menapace Rupert, Findl Oliver
Department of Ophthalmology, Medical University of Vienna, Waehringer Guertel 18-20, A-1090 Vienna, Austria.
Am J Ophthalmol. 2006 Mar;141(3):488-493. doi: 10.1016/j.ajo.2005.10.041.
To examine the influence of optic material (silicone and hydrophobic acrylic) and haptic design (one-piece and three-piece open loop) of sharp optic edge intraocular lenses (IOL) on anterior capsule opacification (ACO) and capsulorrhexis contraction.
Randomized, controlled, double-blind clinical trial with intraindividual comparison.
This study was performed at the Department of Ophthalmology, Medical University of Vienna, Austria, and comprised 210 eyes of 105 patients with bilateral age-related cataract. In group 1 (n = 53 patients), a three-piece acrylic IOL was compared with a three-piece silicone IOL. In group 2 (n = 52 patients), the three-piece acrylic IOL was compared with the one-piece acrylic IOL. One year after the operation, standardized digital slit-lamp images of ACO were taken; 1 week and 1 year after the operation, digital retroillumination images were taken to assess capsulorrhexis size. The intensity of ACO was graded objectively (score, 0% to 100%), and the capsulorrhexis area (square millimeters) was determined objectively.
One year after surgery, the mean ACO score was 21% for the acrylic and 20% for the silicone IOL (P = .4) in group 1 and 18% for both the three-piece and one-piece acrylic IOLs (P = .87) in group 2. Concerning the amount of capsulorrhexis contraction, there was no significant difference between the IOL types that were evaluated in this study (after Bonferroni-Holm correction, P > .05).
In the hydrophobic sharp optic edge IOLs that were examined, neither the optic material nor the haptic design had an influence on the amount of ACO or capsulorrhexis contraction.
研究锐利光学边缘人工晶状体(IOL)的光学材料(硅胶和疏水丙烯酸酯)及襻设计(一体式和三件式开环)对前囊膜混浊(ACO)和撕囊收缩的影响。
采用个体内比较的随机、对照、双盲临床试验。
本研究在奥地利维也纳医科大学眼科进行,纳入105例双侧年龄相关性白内障患者的210只眼。第1组(n = 53例患者)中,将三件式丙烯酸酯IOL与三件式硅胶IOL进行比较。第2组(n = 52例患者)中,将三件式丙烯酸酯IOL与一体式丙烯酸酯IOL进行比较。术后1年,拍摄标准化的ACO数字裂隙灯图像;术后1周和1年,拍摄数字后照图像以评估撕囊大小。客观分级ACO的强度(评分,0%至100%),并客观确定撕囊面积(平方毫米)。
术后1年,第1组中丙烯酸酯IOL的平均ACO评分为21%,硅胶IOL为20%(P = 0.4),第2组中三件式和一体式丙烯酸酯IOL均为18%(P = 0.87)。关于撕囊收缩量,本研究中评估的IOL类型之间无显著差异(经Bonferroni-Holm校正后,P > 0.05)。
在所研究的疏水锐利光学边缘IOL中,光学材料和襻设计均对ACO量或撕囊收缩无影响。