Dowling Adam H, Stamboulis Artemis, Fleming Garry J P
Department of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham, UK.
J Dent. 2006 Nov;34(10):802-10. doi: 10.1016/j.jdent.2006.03.005. Epub 2006 Apr 21.
A pristine calcium montmorillonite (Ca-MMT) and an organically modified 12-amino-dodecanoicacid treated montmorillonite (ADA-MMT) clay were evaluated to determine the reinforcement effect on the performance of a glass ionomer (GI) restorative ChemFil Superior (Dentsply DeTrey, Kanstanz, Germany) to assess the potential as a posterior filling material.
Mean compressive fracture strengths and standard deviations were determined for groups of 30 cylindrical specimens with 0.5-2.5 wt.% Ca-MMT and ADA-MMT additions to either the powder or the liquid elements of the GI. Working characteristics were assessed using an oscillating rheometer, the interlayer d-spacings (d(001)) of each MMT clay was determined using X-ray diffraction (XRD) and the set cement structure was determined by scanning electron microscopy (SEM).
The addition of up to 1.0 wt.% ADA-MMT resulted in a significant increase in the mean compressive fracture strength of the GI utilising the one-way ANOVA and Tukey test comparisons at P<0.05. When Ca-MMT clay was added to the GI a significant reduction in mean strength was recorded (P<0.05). MMT clay addition to the powder and liquid element of the GI in excess of 1.0 wt.% resulted in no significant differences in working characteristics although increases in setting times were evident for MMT addition up to 1.0 wt.%. XRD patterns identified the d(001) peaks for Ca- and ADA-MMT at 2 theta angles of 8.44 degrees and 5.07 degrees and d(001) spacings of 1.04 and 1.74 nm, respectively.
The increased interlayer d-spacings recorded for ADA-MMT clay demonstrates that the clay had expanded layers which may have provided an increased opportunity for the polyacrylic acid chains of the GI restorative to diffuse into the MMT galleries. It is postulated that the increased interlayer d-spacings for the ADA-MMT clay had a positive reinforcing effect on the GI compared with the Ca-MMT clay where no increased performance was identified. The study has highlighted the potential for increasing the performance of GI restoratives when using an organically modified clay as a reinforcement which could increase the potential of GIs as posterior filling materials.
评估原始钙蒙脱石(Ca-MMT)和经有机改性的12-氨基十二烷酸处理的蒙脱石(ADA-MMT)粘土对玻璃离子(GI)修复材料ChemFil Superior(德国康斯坦茨登士柏德瑞公司)性能的增强效果,以评估其作为后牙填充材料的潜力。
测定添加0.5-2.5 wt.% Ca-MMT和ADA-MMT到GI的粉末或液体成分中的30个圆柱形试样组的平均压缩断裂强度和标准偏差。使用振荡流变仪评估工作特性,使用X射线衍射(XRD)测定每种MMT粘土的层间d间距(d(001)),并通过扫描电子显微镜(SEM)确定凝固后水泥结构。
添加高达1.0 wt.%的ADA-MMT导致GI的平均压缩断裂强度显著增加,使用单向方差分析和Tukey检验比较,P<0.05。当向GI中添加Ca-MMT粘土时,记录到平均强度显著降低(P<0.05)。向GI的粉末和液体成分中添加超过1.0 wt.%的MMT粘土,工作特性没有显著差异,尽管添加高达1.0 wt.%的MMT时凝固时间明显增加。XRD图谱在2θ角为8.44度和5.07度时分别确定了Ca-MMT和ADA-MMT的d(001)峰,d(001)间距分别为1.04和1.74 nm。
ADA-MMT粘土记录的层间d间距增加表明粘土层已膨胀,这可能为GI修复材料的聚丙烯酸链扩散到MMT层间提供了更多机会。据推测,与未发现性能提高的Ca-MMT粘土相比,ADA-MMT粘土增加的层间d间距对GI有积极的增强作用。该研究突出了使用有机改性粘土作为增强材料时提高GI修复材料性能的潜力,这可能增加GI作为后牙填充材料的潜力。