Jonsson Magnus P, Jönsson Peter, Höök Fredrik
Division of Solid State Physics, Lund University, SE-22100 Lund, Sweden.
Anal Chem. 2008 Nov 1;80(21):7988-95. doi: 10.1021/ac8008753. Epub 2008 Oct 4.
This paper presents a study of supported lipid bilayer (SLB) formation and subsequent protein binding using a sensor that combines localized surface plasmon resonance (LSPR) and quartz crystal microbalance with dissipation (QCM-D) monitoring. The LSPR activity arises from silicon oxide (SiO x ) coated nanometric apertures in a thin gold film, which also serves as the active electrode of a QCM-D crystal. Both transducer principles provide signatures for the formation of a SLB upon adsorption and subsequent rupture of adsorbed lipid vesicles. However, the two techniques are sensitive over different regions of the sample: LSPR primarily inside and on the rim of the holes and QCM-D primarily on the planar areas between the holes. Although the dimension of the lipid vesicles is on the same order as the dimension of the nanoholes, it is concluded from the response of the combined system that vesicle rupture in the nanoholes and on the planar region between the holes is synchronized. Furthermore, by determining the thickness of the SLB from the QCM-D response, the characteristic decay length of the LSPR field intensity could be determined. This made it possible not only to determine the mass and refractive index of the homogeneous SLB but also to postulate a generic means to quantify the LSPR response in terms of mass-uptake also for nonhomogeneous films. This is exemplified by measuring the adsorbed lipid mass during vesicle adsorption, yielding the critical lipid vesicle coverage at which spontaneous rupture into a planar bilayer occurs. The generic applicability and versatility of the method is demonstrated from specific protein binding to a functionalized SLB. From the absolute refractive index of the protein, provided from the LSPR data alone, it was possible to determine both the effective thickness of the protein film and the molecular mass (or number) of bound protein.
本文介绍了一项关于支持脂质双层(SLB)形成及后续蛋白质结合的研究,该研究使用了一种结合了局域表面等离子体共振(LSPR)和耗散型石英晶体微天平(QCM-D)监测的传感器。LSPR活性源于涂覆在薄金膜上的纳米级氧化硅(SiO x )孔,该金膜同时作为QCM-D晶体的活性电极。两种传感原理都能为吸附的脂质囊泡形成SLB及随后的破裂提供特征信号。然而,这两种技术在样品的不同区域具有敏感性:LSPR主要对孔内部和边缘敏感,而QCM-D主要对孔之间的平面区域敏感。尽管脂质囊泡的尺寸与纳米孔的尺寸处于同一量级,但从组合系统的响应可以得出,纳米孔内和孔之间平面区域的囊泡破裂是同步的。此外,通过根据QCM-D响应确定SLB的厚度,可以确定LSPR场强的特征衰减长度。这不仅使得确定均匀SLB的质量和折射率成为可能,还为根据质量吸收来量化非均匀膜的LSPR响应提出了一种通用方法。这通过测量囊泡吸附过程中吸附的脂质质量得到了例证,从而得出了脂质囊泡自发破裂形成平面双层时的临界覆盖度。该方法的通用适用性和多功能性通过特定蛋白质与功能化SLB的结合得到了证明。仅从LSPR数据提供的蛋白质绝对折射率,就可以确定蛋白质膜的有效厚度以及结合蛋白质的分子量(或数量)。