Fraunhofer Institute of Toxicology and Experimental Medicine, Division of Immunology, Allergology and Airway Research, Nikolai-Fuchs-Str, 1, 30625 Hannover, Germany.
Respir Res. 2009 Sep 30;10(1):90. doi: 10.1186/1465-9921-10-90.
Pulmonary surfactant reduces surface tension and is present at the air-liquid interface in the alveoli where inhaled nanoparticles preferentially deposit. We investigated the effect of titanium dioxide (TiO(2)) nanosized particles (NSP) and microsized particles (MSP) on biophysical surfactant function after direct particle contact and after surface area cycling in vitro. In addition, TiO(2) effects on surfactant ultrastructure were visualized.
A natural porcine surfactant preparation was incubated with increasing concentrations (50-500 microg/ml) of TiO(2) NSP or MSP, respectively. Biophysical surfactant function was measured in a pulsating bubble surfactometer before and after surface area cycling. Furthermore, surfactant ultrastructure was evaluated with a transmission electron microscope.
TiO(2) NSP, but not MSP, induced a surfactant dysfunction. For TiO(2) NSP, adsorption surface tension (gammaads) increased in a dose-dependent manner from 28.2 + or - 2.3 mN/m to 33.2 + or - 2.3 mN/m (p < 0.01), and surface tension at minimum bubble size (gammamin) slightly increased from 4.8 + or - 0.5 mN/m up to 8.4 + or - 1.3 mN/m (p < 0.01) at high TiO(2) NSP concentrations. Presence of NSP during surface area cycling caused large and significant increases in both gammaads (63.6 + or - 0.4 mN/m) and gammamin (21.1 + or - 0.4 mN/m). Interestingly, TiO(2) NSP induced aberrations in the surfactant ultrastructure. Lamellar body like structures were deformed and decreased in size. In addition, unilamellar vesicles were formed. Particle aggregates were found between single lamellae.
TiO(2) nanosized particles can alter the structure and function of pulmonary surfactant. Particle size and surface area respectively play a critical role for the biophysical surfactant response in the lung.
肺表面活性剂可降低表面张力,并存在于肺泡的气液界面,吸入的纳米颗粒优先在此沉积。我们研究了二氧化钛(TiO2)纳米颗粒(NSP)和微米颗粒(MSP)与表面活性剂直接接触以及体外表面积循环后对生物物理表面活性剂功能的影响。此外,还观察了 TiO2 对表面活性剂超微结构的影响。
用天然猪肺表面活性剂制剂分别孵育不同浓度(50-500μg/ml)的 TiO2 NSP 或 MSP。在脉冲气泡表面张力仪中测量表面积循环前后的生物物理表面活性剂功能。此外,用透射电子显微镜评估表面活性剂超微结构。
TiO2 NSP 而非 MSP 可导致表面活性剂功能障碍。对于 TiO2 NSP,吸附表面张力(γads)呈剂量依赖性增加,从 28.2±2.3mN/m 增加到 33.2±2.3mN/m(p<0.01),最小气泡尺寸时的表面张力(γmin)也略有增加,从 4.8±0.5mN/m 增加到 8.4±1.3mN/m(p<0.01),在高 TiO2 NSP 浓度下。表面积循环过程中存在 NSP 会导致γads(63.6±0.4mN/m)和γmin(21.1±0.4mN/m)显著增加。有趣的是,TiO2 NSP 会使表面活性剂超微结构发生畸变。板层体样结构变形且变小。此外,还形成了单层囊泡。在单层之间发现了颗粒聚集体。
TiO2 纳米颗粒可改变肺表面活性剂的结构和功能。颗粒大小和表面积分别对肺部生物物理表面活性剂反应起着至关重要的作用。