Department of Physics, Chemistry, and Biology (IFM), Linköping University, SE-581 83 Linköping, Sweden.
Nanotechnology. 2009 Dec 9;20(49):495304. doi: 10.1088/0957-4484/20/49/495304. Epub 2009 Nov 11.
Highly oriented AlN single crystal nanowires with aspect ratio up to 600, diameter in the range of 40-500 nm, and 100 microm lengths, have been synthesized via a vapor-solid growth mechanism. The results were obtained at 1750 degrees C and 850 mbar nitrogen pressure on vicinal SiC substrates pretreated by SiC sublimation epitaxy in order to attain distinguishable terraces. It was found that the nanowires change in thickness after they have reached a critical length, and this fact contributes to an understanding of the growth mechanism of AlN nanowires. The nanowires are hexagonally shaped and perfectly aligned along the [0001] direction with a small tilt given by the substrate vicinality. Under nitrogen excess a preferential growth along the c-axis of the wurtzite structure takes place while below some critical value of nitrogen pressure the growth mode switches to lateral. The AlN nanowires are shown to have a dislocation free wurtzite crystal structure. Some possible applications are discussed.
高度取向的氮化铝单晶纳米线,纵横比高达 600,直径在 40-500nm 之间,长度为 100 微米,通过汽-固生长机制合成。实验结果是在 1750°C 和 850mbar 的氮气压力下,在经过碳化硅升华外延预处理的斜切 SiC 衬底上获得的,目的是获得可分辨的平台。研究发现,纳米线在达到临界长度后会发生厚度变化,这一事实有助于理解氮化铝纳米线的生长机制。纳米线呈六边形,沿[0001]方向完美排列,由于衬底的斜度,存在一个小的倾斜。在过量氮气的情况下,优先沿着纤锌矿结构的 c 轴生长,而在氮气压力低于某个临界值时,生长模式切换为横向。实验表明,氮化铝纳米线具有无位错的纤锌矿晶体结构。讨论了一些可能的应用。