Suppr超能文献

采用纳滤和反渗透处理医院废水。

Treatment of hospital wastewater effluent by nanofiltration and reverse osmosis.

机构信息

RWTH Aachen University, Institute of Environmental Engineering (ISA), Mies-van-der-Rohe-Strasse 1, 52074 Aachen, Germany.

出版信息

Water Sci Technol. 2010;61(7):1691-8. doi: 10.2166/wst.2010.119.

Abstract

Considerable concern exists regarding the appearance and effects of trace and ultra trace pollutants in the aquatic environment. In this context, it is necessary to identify relevant hot spot wastewater - such as hospital wastewater - and to implement specific wastewater treatment solutions. Membrane bioreactor (MBR) technology seems to be a suitable pre-treatment approach for the subsequent advanced treatment by high pressure membrane systems such as nanofiltration (NF) and reverse osmosis (RO). This paper is based upon investigations on the first full scale MBR for separate treatment of hospital wastewater in Germany. In this study an NF as well as an RO module for further treatment of the MBR filtrate were tested. The removal efficiencies were assessed using the following target compounds: bezafibrate, bisoprolol, carbamazepine, clarithromycin, ciprofloxacin, diclofenac, ibuprofen, metronidazole, moxifloxacin, telmisartan and tramadol. In summary, the results of this study confirmed that MBR technology followed by an advanced treatment for trace pollutant removal is an adequate approach for specific treatment of hot spot wastewater such as hospital wastewater. In particular, it was shown that - comparing the tested NF and RO - only (a two stage) RO is appropriate to remove pharmaceutical residues from hospital wastewater entirely. The recommended yield of the 2-stage RO is 70% which results in a retentate sidestream of 9%. Our investigations proved that RO is a very efficient treatment approach for elimination of trace pollutants.

摘要

人们对水环境污染中的痕量和超痕量污染物的外观和影响存在相当大的担忧。在这种情况下,有必要确定相关的热点废水,如医院废水,并实施特定的废水处理解决方案。膜生物反应器(MBR)技术似乎是后续通过高压膜系统(如纳滤(NF)和反渗透(RO))进行高级处理的合适预处理方法。本文基于对德国第一个用于单独处理医院废水的全规模 MBR 的研究。在这项研究中,测试了用于进一步处理 MBR 滤液的 NF 和 RO 模块。使用以下目标化合物评估去除效率:非诺贝特、比索洛尔、卡马西平、克拉霉素、环丙沙星、双氯芬酸、布洛芬、甲硝唑、莫西沙星、替米沙坦和曲马多。总之,这项研究的结果证实,MBR 技术随后进行痕量污染物去除的高级处理是处理热点废水(如医院废水)的一种合适方法。特别是,结果表明,与测试的 NF 和 RO 相比,只有(两级)RO 才能完全去除医院废水中的药物残留。两级 RO 的建议产率为 70%,这导致 9%的保留物侧流。我们的研究证明,RO 是消除痕量污染物的非常有效的处理方法。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验