The Ludwig Boltzmann Institute for Retinology and Biomicroscopic Laser Surgery, Juchgasse 25, 1030, Vienna, Austria.
Graefes Arch Clin Exp Ophthalmol. 2010 Dec;248(12):1693-8. doi: 10.1007/s00417-010-1415-9. Epub 2010 May 23.
Automatically measurements of retinal thickness by optical coherence tomography (OCT) facilitate the assessment of various retinal diseases.The aim of this retrospective study was to report macular thickness measurements in eyes with vascular pigment epithelial detachment (PED) due to age-related macular degeneration (AMD) by using two different commercially available spectral domain (SD) OCT instruments and to consequently point out differences in their algorithm software.systems.
OCT images of patients with vascular PED due to AMD, obtained with Cirrus and Spectralis OCT, were retrospectively analyzed. Main objectives were to observe differences in central retinal thickness (CRT) values and failures in automated threshold delineation, as well as central point thickness values obtained after manual correction of threshold lines. Scanning with the Cirrus HD OCT was performed with the 512 × 128 scan pattern; scans performed with the Spectralis OCT were 20 × 15 degree raster scans consisting of 19 high-speed line scans.
OCT images of 34 eyes of 28 patients with a mean age of 71 years and a mean distance visual acuity (VA) of 0.70 ETDRS were analyzed. Mean central retinal thickness (CRT) was 262.38 μm ± 133.18 (176-507 μm) in Cirrus and 337.82 μm ± 137.75 (277-790 μm) in Spectralis scans,mainly caused by different software approaches in positioning the posterior threshold line, following the PED in Cirrus OCT whereas remaining unelevated in Spectralis OCT. There were failures in positioning the outer retinal boundary line in 50% of Cirrus scans and in 73.52% of Spectralis scans. We obtained the mean value of central point neurosensory retinal thickness of each central single scan after manual delineation, and found a significant correlation (r = 0.819, p < 0.001).
Our study indicates that there are significant differences in CRT values in patients with vascular PED, due to different segmentation algorithms and a high error rate in automatically set threshold lines. When planning and conducting multicenter studies, one has to be especially aware of the differences in delineating threshold algorithm lines by different SD OCT devices.
光学相干断层扫描(OCT)自动测量视网膜厚度有助于评估各种视网膜疾病。本回顾性研究的目的是报告使用两种不同的商用谱域(SD)OCT 仪器对年龄相关性黄斑变性(AMD)引起的血管性色素上皮脱离(PED)的黄斑厚度测量,并指出其算法软件系统的差异。
回顾性分析 AMD 患者血管性 PED 的 OCT 图像,这些图像分别由 Cirrus 和 Spectralis OCT 获得。主要观察指标为中心视网膜厚度(CRT)值的差异和自动阈值描绘失败,以及手动校正阈值线后获得的中心点厚度值。Cirrus HD OCT 扫描采用 512×128 扫描模式;Spectralis OCT 扫描采用 20×15 度光栅扫描,由 19 条高速线扫描组成。
分析了 28 例患者 34 只眼的 OCT 图像,患者平均年龄 71 岁,平均远视力(VA)为 0.70 ETDRS。Cirrus 组的平均 CRT 为 262.38μm±133.18μm(176-507μm),Spectralis 组为 337.82μm±137.75μm(277-790μm),主要原因是 Cirrus OCT 中定位后阈值线时采用了不同的软件方法,随 PED 移动,而 Spectralis OCT 中则保持不变。Cirrus 扫描中有 50%的外视网膜边界线定位失败,Spectralis 扫描中有 73.52%的外视网膜边界线定位失败。我们在手动描绘后获得了每个中央单点扫描的中心点神经感觉视网膜厚度的平均值,并发现了显著的相关性(r=0.819,p<0.001)。
我们的研究表明,血管性 PED 患者的 CRT 值存在显著差异,这是由于不同的分割算法和自动设置阈值线的高错误率所致。在计划和进行多中心研究时,必须特别注意不同 SD-OCT 设备描绘阈值算法线的差异。