Suppr超能文献

不可还原型股骨颈骨折:一种微创复位技术。

An irreducible variant of femoral neck fracture: a minimally traumatic reduction technique.

机构信息

Department of Orthopaedics, 3rd Hospital, Hebei Medical University, No. 139 Ziqiang Road, Shijiazhuang, Hebei 050051, PR China.

出版信息

Injury. 2011 Feb;42(2):140-5. doi: 10.1016/j.injury.2010.05.008.

Abstract

We present 25 cases of irreducible variant femoral neck fractures that require surgical management after routine manipulative manoeuvre attempts have failed. In our study, an irreducible variant of femoral neck fractures is defined as a reduction that cannot be achieved after multiple attempts at closed reduction. This was evident radiographically, as seen in displaced–impacted femoral neck fractures when the proximal femur compacts and rotates along with the distal part, and anatomical reduction cannot be achieved with manipulative manoeuvres. Another rare situation also included is when the proximal fragment disconnects from the femur and dislocates as a ‘floating’ component, consequently resulting in failure of alignment of the distal fragment to the proximal femur.Here, we describe a technique, applied as a minimally traumatic procedure to achieve anatomic reduction in such cases. With the patient placed in supine position on the fracture table under general anaesthesia, the injury site is exposed and the procedure performed under intra-operative radiographic control. Location of the femoral artery is done first by palpation. The insertion site of the K-wires or Steinman pins on the proximal thigh is 1.5–3 cm lateral to the femoral artery. The K-wires or Steinmanpins are inserted vertically into the middle 1/2–2/3 of the femoral head and more than 1 cm inferior to the sub-chondral bone of the femoral head to a depth of approximately, 1/2 diameter of the femoral head. The pins are then used as a joystick to control the movement of the proximal femur. With the help of the K-wires, surgeons can manually control the movement of the proximal femur and ensure anatomic reduction with the distal fragment using routine-closed reduction. Three cannulated screws are used to stabilise the fracture after anatomic reduction is achieved and maintained in a stable position. All cases were treated with this minimally invasive procedure and internal fixation, 25 fractures united,uneventfully, whilst two of them developed femoral head necrosis at 10 months and 4.5 years postoperatively, respectively.

摘要

我们介绍了 25 例经常规手法复位失败后需要手术治疗的不可复位变异型股骨颈骨折。在我们的研究中,不可复位变异型股骨颈骨折定义为多次闭合复位尝试后仍无法复位。这在影像学上表现为移位-嵌插型股骨颈骨折,此时股骨近端与远端一起压缩和旋转,无法通过手法复位达到解剖复位。另一种罕见情况是近端骨折块与股骨分离并作为“游离”部分脱位,导致远端骨折块与股骨近端对线不良。在这里,我们描述了一种技术,作为一种微创程序应用于此类病例,以实现解剖复位。患者全身麻醉后仰卧在骨折桌上,暴露损伤部位,并在术中放射学控制下进行操作。首先通过触诊确定股动脉的位置。在大腿近端插入 K 型钉或斯氏针的位置应距股动脉外侧 1.5-3 厘米。K 型钉或斯氏针垂直插入股骨头的中 1/2-2/3 处,距股骨头软骨下骨下方超过 1 厘米,深度约为股骨头直径的 1/2。然后,这些针用作操纵杆来控制股骨近端的运动。借助 K 型钉,外科医生可以手动控制股骨近端的运动,并使用常规闭合复位确保与远端骨折块的解剖复位。在达到解剖复位并保持稳定位置后,使用三根空心螺钉固定骨折。所有病例均采用这种微创程序和内固定治疗,25 例骨折均愈合良好,无并发症,其中 2 例分别在术后 10 个月和 4.5 年后发生股骨头坏死。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验