A comparison between fibreoptic and catheter-tip bridge strain gauge transducers for measurement of intrauterine pressure in labour.

A new fibreoptic pressure transducer was used to measure uterine activity in labour, and the results were compared with those obtained with the catheter-tip bridge strain gauge transducer. Readings were obtained from 8 patients in spontaneous labour, and a total of 565 contractions were analysed. When all contractions were analysed the coefficient of variation ranged from 11.24 to 42.74. In 2 patients with vast difference in pressure readings one of the catheters had slipped into the lower uterine segment, when these 2 cases were not considered the coefficient of variation ranged from 11.24 to 21.18. Even in the others there were transient periods lasting 5 to 15 minutes when the pressure difference was greater than 10 mmHg between the 2 catheters. When they were excluded from analysis, along with the 2 cases where one of the catheters was displaced, the coefficient of variation ranged from 9.30 to 16.05. The fibreoptic pressure transducer appears to be a safe, convenient and fairly accurate means of assessing uterine activity. But one must be aware that a catheter giving low readings compared with the initial period soon after insertion may be due to displacement of the transducer tip to the uterine lower segment.