Cambridge University, Department of Chemistry, Lensfield Road, Cambridge CB2 1EW, United Kingdom.
J Phys Chem B. 2010 Nov 25;114(46):14916-23. doi: 10.1021/jp108618d. Epub 2010 Nov 1.
A recognized shortcoming in current protein simulations is that most force fields are parametrized with relatively primitive three-site water models. Since the deficiencies of the common three-site water models in reproducing the phase diagram of water are well-known, an improved description of the solvent will be required, for example, to study proteins in molecular simulations at thermodynamic conditions other than standard temperature and pressure. Here, we combine a protein force field derived from Amber ff03 together with the highly optimized TIP4P/2005 water model, with a small backbone modification to match the population of helical states obtained with the new water model to experiment. Remarkably, we find that the resulting force field, Amber ff03w, produces a more cooperative helix-coil transition, compared with the similarly "backbone-corrected" Amber ff03* model with TIP3P water, with calculated helix propagation parameters in good agreement with the experiment. The radius of gyration for nonhelical conformations is significantly larger for Amber ff03w than for Amber ff03* and shows a collapse with increasing temperature as found in single-molecule experiments on longer proteins. The origin of the collapse appears to be a more favorable enthalpic component of the peptide-solvent interaction and is correlated with increasing turn formation, in accord with the experiment. In addition to this enhanced cooperativity, we verify that, with the new force field, replica exchange folding simulations of the GB1 hairpin and Trp cage result in folded structures, starting from completely unfolded initial conditions; simulations of folded proteins are also stable. These results together suggest that Amber ff03w (with TIP4P/2005) will be well suited for studying protein folding and properties of unfolded state and intrinsically disordered proteins over a wide range of thermodynamic conditions.
当前蛋白质模拟的一个公认缺陷是,大多数力场都是用相对原始的三位点水模型参数化的。由于常见的三位点水模型在再现水的相图方面存在缺陷是众所周知的,因此需要对溶剂进行更精确的描述,例如,在标准温度和压力以外的热力学条件下研究分子模拟中的蛋白质。在这里,我们将源自 Amber ff03 的蛋白质力场与高度优化的 TIP4P/2005 水模型相结合,对骨架进行小的修改,以匹配新水模型得到的螺旋状态的分布与实验结果相符。值得注意的是,与用 TIP3P 水的类似“骨架修正”的 Amber ff03模型相比,所得力场 Amber ff03w 产生了更协同的螺旋-卷曲转变,且计算得到的螺旋延伸参数与实验结果非常吻合。非螺旋构象的回转半径对于 Amber ff03w 来说比 Amber ff03 大得多,并且随着温度的升高而发生坍塌,这与单分子实验中对较长蛋白质的观察结果一致。坍塌的起源似乎是肽-溶剂相互作用的有利焓分量,与实验结果一致,转角形成增加。除了这种协同作用增强之外,我们还验证了,使用新的力场,GB1 发夹和色氨酸笼的 replica exchange 折叠模拟可以从完全展开的初始条件出发得到折叠结构;折叠蛋白的模拟也是稳定的。这些结果表明,Amber ff03w(与 TIP4P/2005 一起)将非常适合在广泛的热力学条件下研究蛋白质折叠以及未折叠状态和固有无序蛋白质的性质。