Department of Nuclear Medicine, Chang Gung Memorial Hospital, Keelong, Taiwan, Republic of China.
J Digit Imaging. 2011 Dec;24(6):1010-23. doi: 10.1007/s10278-011-9361-6.
Glomerular filtration rate (GFR) is a common accepted standard estimation of renal function. Gamma camera-based methods for estimating renal uptake of (99m)Tc-diethylenetriaminepentaacetic acid (DTPA) without blood or urine sampling have been widely used. Of these, the method introduced by Gates has been the most common method. Currently, most of gamma cameras are equipped with a commercial program for GFR determination, a semi-quantitative analysis by manually drawing region of interest (ROI) over each kidney. Then, the GFR value can be computed from the scintigraphic determination of (99m)Tc-DTPA uptake within the kidney automatically. Delineating the kidney area is difficult when applying a fixed threshold value. Moreover, hand-drawn ROIs are tedious, time consuming, and dependent highly on operator skill. Thus, we developed a fully automatic renal ROI estimation system based on the temporal changes in intensity counts, intensity-pair distribution image contrast enhancement method, adaptive thresholding, and morphological operations that can locate the kidney area and obtain the GFR value from a (99m)Tc-DTPA renogram. To evaluate the performance of the proposed approach, 30 clinical dynamic renograms were introduced. The fully automatic approach failed in one patient with very poor renal function. Four patients had a unilateral kidney, and the others had bilateral kidneys. The automatic contours from the remaining 54 kidneys were compared with the contours of manual drawing. The 54 kidneys were included for area error and boundary error analyses. There was high correlation between two physicians' manual contours and the contours obtained by our approach. For area error analysis, the mean true positive area overlap is 91%, the mean false negative is 13.4%, and the mean false positive is 9.3%. The boundary error is 1.6 pixels. The GFR calculated using this automatic computer-aided approach is reproducible and may be applied to help nuclear medicine physicians in clinical practice.
肾小球滤过率(GFR)是一种常用的肾功能评估标准。目前,已有许多不依赖血液或尿液样本,通过伽马相机来估算肾脏对(99m)Tc-二乙三胺五乙酸(DTPA)摄取的方法。其中,Gates 方法是最常用的方法。目前,大多数伽马相机都配备了用于 GFR 测定的商业程序,该程序通过手动在每个肾脏上绘制感兴趣区域(ROI)进行半定量分析。然后,可以通过自动计算肾内(99m)Tc-DTPA 摄取的闪烁显像来计算 GFR 值。应用固定阈值值时,肾脏区域的勾画比较困难。此外,手动 ROI 勾画繁琐、耗时,并且高度依赖于操作人员的技能。因此,我们开发了一种基于强度计数的时间变化、强度对分布图像对比度增强方法、自适应阈值和形态学操作的全自动肾脏 ROI 估算系统,该系统可以定位肾脏区域并从(99m)Tc-DTPA 肾图中获取 GFR 值。为了评估所提出方法的性能,我们引入了 30 例临床动态肾图。该全自动方法在一位肾功能非常差的患者中失败。4 位患者为单侧肾脏,其余患者为双侧肾脏。剩下的 54 个肾脏的自动轮廓与手动绘制的轮廓进行了比较。对 54 个肾脏进行了面积误差和边界误差分析。两名医生的手动轮廓与我们方法获得的轮廓之间具有高度相关性。对于面积误差分析,真阳性面积重叠的平均值为 91%,假阴性的平均值为 13.4%,假阳性的平均值为 9.3%。边界误差为 1.6 像素。使用这种自动计算机辅助方法计算的 GFR 是可重复的,并且可以应用于帮助核医学医师进行临床实践。